EPSOLAR MT50 Backlit LCD Display Voltmeter Ammeter for EPSOLAR LSxxxxB(P) VSxxxxBN TracerxxxxBN(P) Series Charge Controller
The display indicates:
- the voltage and current generated by the panel;
- the battery voltage;
- the voltage applied and current absorbed by the load;
- percentage of capacity stored by the battery;
- battery charge status.
In addition to these measurements, the operating mode of the charge controller can be programmed via the display.
For example, it is possible to set the TWILIGHT function and modify the various parameters such as the load connection and disconnection voltage (lamps, etc.).
You can also set a timer to turn the lights on and off at a specific time.
There are also two LED indicators that respectively warn of a connection problem with the device (Warning) and the connection status with the charge regulator (COM).
It is equipped with 6 buttons to easily move through the menu.
Using the buttons you can change various parameters:
- battery capacity,
- battery technology (Lead, Gel, AGM)
- battery temperature coefficient
etc..
TECHNICAL INFORMATION:
- MT50 Black Backlit LCD Display
- Cable supplied: 2 meters with 8-pin RJ45 connectors
- Self-consumption: <17mA with LCD and LED off; <23 mA with LCD and LED on
- Operating temperature: -15 to +40°C
- Dimensions: 114 x 114 x 32.7 mm
- Hardware: 4 Wall plugs with screws ST4.2X32
- 4 M4X8 screws for fixing the display to the wall spacer
- 4 White screw caps.
16 other products in the same category:
EPSOLAR TRACER 2210AN 20A MPPT charge controller uses the latest technology for these devices. This is the MPPT function that ensures 30% higher efficiency compared to traditional charge regulators. Equipped with built-in multi-function LCD...
MICRO USB-USB FEMALE ADAPTER FOR EPEVER EPSOLAR CHARGE REGULATOR The Micro USB adapter allows you to connect EPEVER (EPSolar) charge controllers to your Smartphone for easy monitoring and programming. Technical information: Model: CC-OTG-12
EXTERNAL TEMPERATURE SENSOR FOR EPEVER EPSOLAR CHARGE CONTROLLER The temperature sensor is connected to the charge controller and applied to the battery. This allows the sensor to transmit the exact battery temperature to the charge controller....
CBE PT742 Touch Display for PRS300 and PRM350 Solar Camper Charge Controller DIGITAL TOUCH TEST PANEL with OLED display for checking the battery voltage and the current supplied by the photovoltaic module, complete with 1.5m cable, spacer for...
CBE PRS300 charge regulator kit with CBE PT642 display. THE PRS300 PHOTOVOLTAIC MODULE REGULATOR is designed and built with innovative electronic techniques that allow maximum performance of the photovoltaic modules connected to it. The regulator...
The Phocos BCM is an innovative charger for AA batteries. It charges at constant current and limits the voltage to avoid overcharging the batteries. It is possible to charge batteries of different capacities and from different manufacturers, as...
NV-1024 YJSS10 CHARGE REGULATOR Campers and campers are increasingly demanding and want all the comforts of home even on vacation. The number of light points and electrical and electronic systems on board has increased exponentially. Televisions,...
MPPT charge controller with display EPSOLAR TRACER 3215AN 30A uses the latest technology for these devices. This is the MPPT function that ensures 30% higher efficiency compared to traditional charge regulators. Thanks to this function, the...
CBE PRS350 Charge regulator for camper photovoltaic panel The PRS350 solar regulator is suitable for operation with 12V photovoltaic modules. Designed and manufactured with innovative electronic techniques, it is characterized by high electrical...
MPPT SOLAR REGULATOR 10A Bluetooth Waterproof IP67 Get the most out of your solar system with automatic maximum power point adjustment. Battery charge status consideration. LED operation indicators. Watertight product, therefore usable in all...
This is the MPPT function which ensures a 30% higher efficiency, compared
to classic charge regulators.
Very high tracking efficiency of the maximum power point, equal to or higher
to 99.5%Thanks to this function the...
New EPEVER GoMate GM3024N 12/24V - 30A charge controller. It is possible to set the type of battery used (GEL, lead, AGM). Technical Information Model: Epever GoMate GM3024N
Battery input voltage range: 8V-32V
Rated current: 30A...
RS485-USB ADAPTER FOR EPEVER EPSOLAR CHARGE REGULATOR OR INVERTER With the appropriate monitoring software for the controller, you can, for example, track and graphically record solar power, battery voltage and load power in real time and change...
SOLAR CHARGE CONTROLLER EPEVER®XTRA 4210N-XDS2 MPPTThe XTRA-N series is the latest member of EPEVER's family of MPPT regulators.
It has improved design and performance based on the previous successful Tracer AN series.
MPPT (Max Power...
Door
the energy autonomy of your camper to the next level with the
new PRM400 solar charge controller from CBE. This device
advanced is the brain of your photovoltaic system, designed to
make the most of every single ray of sunshine,...
EZA MPPT 40A Twilight Solar Photovoltaic Bluetooth charge controller.
Get the most out of your solar system thanks to automatic adjustment of the maximum power point.
Whether you wish to equip your leisure vehicle with one or more solar...
Customers who bought this product also bought:
BARWIG PUMP TYP04 12V DC Submersible water pump operating at 12V. The pump is immersed directly in the tank and can be used for various purposes: In a camper or boat as a simple external shower In the boat as a bilge pump To fill the internal tank...
1-module frame for CBE sockets and controls. Model CBE MAC1P. ?MODULAR PLATES? series. TECHNICAL INFORMATION No. 1 grey frame Size: 60x 60 mm
Pair of 5m Red + 5m Black solar cable with 4mm section. They are flexible cables suitable for installation in photovoltaic systems. Polymer insulation and halogen-free sheath. The period of use under normal conditions is 25 years. They are...
CHIMNEY FOR CAMPER HOOD Plastic chimney for hood, complete with ring and gasket. Hole Ø 60 mm. Made in Italy TECHNICAL INFORMATION Material: plastic Color: white Hole diameter: 60mm
MPPT charge controller with display EPSOLAR TRACER 3215AN 30A uses the latest technology for these devices. This is the MPPT function that ensures 30% higher efficiency compared to traditional charge regulators. Thanks to this function, the...
Stabilized lights without brightness oscillations, STABILIGHT technology. Specific spare parts for recreational vehicles and boats. Professional G4 lamp with 12 LEDs among the most powerful on the market. The power of this lamp is 2W and allows...
EPSOLAR TRACER 2210AN 20A MPPT charge controller uses the latest technology for these devices. This is the MPPT function that ensures 30% higher efficiency compared to traditional charge regulators. Equipped with built-in multi-function LCD...
Spacer for wall mounting of CBE sockets and controls. Model CBE MAD. Suitable for mounting with MAC1P frame ?MODULAR PLATES? series. TECHNICAL INFORMATION No. 1 frame in Grey RAL7015 colour Dimensions: 60 x 60 x 10mm
