TEMPERATURE SENSOR FOR EPEVER EPSOLAR CHARGE CONTROLLER
The temperature sensor is connected to the charge controller and applied to the battery. This allows the sensor to transmit the exact temperature of the battery to the charge controller.
This temperature sensor is suitable for the series:
EXTERNAL TEMPERATURE SENSOR FOR EPEVER EPSOLAR CHARGE CONTROLLER The temperature sensor is connected to the charge controller and applied to the battery. This allows the sensor to transmit the exact battery temperature to the charge controller....
SOLAR CHARGE CONTROLLER EPEVER®XTRA 4210N-XDS2 MPPTThe XTRA-N series is the latest member of EPEVER's family of MPPT regulators.
It has improved design and performance based on the previous successful Tracer AN series.
MPPT (Max Power...
CBE PRS300 charge regulator kit with CBE PT642 display. THE PRS300 PHOTOVOLTAIC MODULE REGULATOR is designed and built with innovative electronic techniques that allow maximum performance of the photovoltaic modules connected to it. The regulator...
The PRM350 solar regulator is able to charge lead batteries (liquid, gel and AGM) and 12V lithium batteries automatically by controlling and limiting the energy supplied by the connected photovoltaic modules. It has an MPPT (Maximum Power Point...
RS485-USB ADAPTER FOR EPEVER EPSOLAR CHARGE REGULATOR OR INVERTER With the appropriate monitoring software for the controller, you can, for example, track and graphically record solar power, battery voltage and load power in real time and change...
The Phocos BCM is an innovative charger for AA batteries. It charges at constant current and limits the voltage to avoid overcharging the batteries. It is possible to charge batteries of different capacities and from different manufacturers, as...
Door
the energy autonomy of your camper to the next level with the
new PRM400 solar charge controller from CBE. This device
advanced is the brain of your photovoltaic system, designed to
make the most of every single ray of sunshine,...
New EPEVER GoMate GM3024N 12/24V - 30A charge controller. It is possible to set the type of battery used (GEL, lead, AGM). Technical Information Model: Epever GoMate GM3024N
Battery input voltage range: 8V-32V
Rated current: 30A...
SOLAR REGULATOR LCD PWM 20A PWM Smart Pulse solar controllers enable the safe operation of small power solar panels (up to 130W). They effectively protect batteries from overvoltage, deep discharge, short circuits, voltage spikes and sulfation....
VECHLINE CHARGE REGULATORS - PWM 10A 12/24 V Intelligent charge controller with automatic switch 12/24V. User-friendly LCD screen. PWM technology to ensure optimal charging by increasing battery life. Four working modes available. Suitable for...
EPSOLAR TRACER1210AN 10A MPPT charge controller uses the latest technology for these devices. This is the MPPT function that ensures 30% higher efficiency compared to traditional charge regulators. Very high maximum power point tracking...
EPEVER TRACER 4210AN 40A MPPT charge controller uses the latest technology for these devices. This is the MPPT function that ensures 30% higher efficiency compared to traditional charge regulators. Equipped with built-in multi-function LCD...
EPSOLAR TRACER 2210AN 20A MPPT charge controller uses the latest technology for these devices. This is the MPPT function that ensures 30% higher efficiency compared to traditional charge regulators. Equipped with built-in multi-function LCD...
MPPT charge controller with display EPSOLAR TRACER 3215AN 30A uses the latest technology for these devices. This is the MPPT function that ensures 30% higher efficiency compared to traditional charge regulators. Thanks to this function, the...
The CMM remote display connected to the Phocos CA CML and CMLNL series charge controllers allows you to view: Current produced by the photovoltaic panel Battery voltage Current absorbed by the load (e.g. light bulbs) The display shows the values...
CBE PT742 Touch Display for PRS300 and PRM350 Solar Camper Charge Controller DIGITAL TOUCH TEST PANEL with OLED display for checking the battery voltage and the current supplied by the photovoltaic module, complete with 1.5m cable, spacer for...
CBE MAP/G LID Replacement cover for camper sockets from the CBE Modular Plates series Gray color model. TECHNICAL INFORMATION Model: CBE MAP Color: Grey Ral7015 CBE Code: 212668
"T" fittings for ø 75mm pipe with adjustable fin to best optimise hot air flows in the desired areas. TECHNICAL INFORMATION Manufacturer: AutoTerm Compatibility: AutoTerm 4D Tube diameter: 75mm Color : black
The Conversion Van 28x28 skylight cm is the ideal solution to ensure optimal ventilation inside campers, equipped vans, caravans or transformed vehicles, ensuring a fresh and pleasant environment during your travels. With an elegant and functional...
Digital panel voltmeter, operating at 12Vdc. Equipped with 3M double-sided tape for quick and easy installation. Therefore suitable for permanent installation on Caravans, Campers and boats. No standby consumption and suitable for use with Gel,...
White door stopper suitable for stopping the storage compartments outside the camper. It has a spring to speed up the locking of the storage compartment door. Fixing with screws not supplied in the package. TECHNICAL INFORMATION White color...
German standard 230V Schuko socket with cover. This socket can be combined with CBE frames. PACKAGE CONTENTS Model CBE MP22D No. 1 230V Schuko socket with cover Colour Grey RAL7015
