The CBE PRS300 PHOTOVOLTAIC MODULE REGULATOR is designed and built with innovative electronic techniques that allow maximum performance of the photovoltaic modules connected to it.
The regulator is suitable for connecting 12V photovoltaic modules up to a maximum total power of 300W and is designed for connecting the CBE PT642 test panel required for checking the charging of the photovoltaic modules and the battery voltage.
The PRS300 is able to charge lead-gel, lead-acid, AGM and lithium batteries (with integrated electronics), using the appropriate charging line (selectable with the switch located inside the regulator).
A desulfation function is provided which activates automatically when the battery requires this process.
The device has 4 LEDs for signalling:
- Battery charging phase with maximum current until the end-of-charge voltage is reached.
- Constant voltage maintenance phase.
- Incorrect electrical connection alarm.
- Regulator on (in the absence of sunlight the regulator switches off automatically).
High electrical efficiency and very low heat dissipation characterize the PRS300.
TECHNICAL INFORMATION:
- Model: PRS300
- Recommended photovoltaic module power: 300 Watt Max
- Photovoltaic input number: 2
- Rated voltage: 12V
- Auto power off: in the absence of sunlight
- Maximum voltage: 14.3V (Pb-Gel) 14.1V (Pb-Acid) 14.7 (AGM and Lithium)
- Float voltage: 13.8V (Pb-Gel) 13.5V (Pb-Acid) 13.8V (AGM and Lithium)
- Battery desulfation: Yes
- Reverse current blocking device: Electronic
- Dimensions: 115 x 88 x 37 mm
- Weight: 120gr
Can be combined with the CBE PT642 multifunction display
Specific References
- EAN13
- 8033123264723
- MPN
- PRS300
16 other products in the same category:
EPEVER TRACER 4210AN 40A MPPT charge controller uses the latest technology for these devices. This is the MPPT function that ensures 30% higher efficiency compared to traditional charge regulators. Equipped with built-in multi-function LCD...
MPPT SOLAR REGULATOR 10A Bluetooth Waterproof IP67 Get the most out of your solar system with automatic maximum power point adjustment. Battery charge status consideration. LED operation indicators. Watertight product, therefore usable in all...
EPSOLAR MT50 Backlit LCD Display Voltmeter Ammeter for EPSOLAR LSxxxxB(P) VSxxxxBN TracerxxxxBN(P) Series Charge Controller The display indicates: the voltage and current generated by the panel; the battery voltage; the voltage applied and...
The PRM350 solar regulator is able to charge lead batteries (liquid, gel and AGM) and 12V lithium batteries automatically by controlling and limiting the energy supplied by the connected photovoltaic modules. It has an MPPT (Maximum Power Point...
New EPEVER GoMate GM3024N 12/24V - 30A charge controller. It is possible to set the type of battery used (GEL, lead, AGM). Technical Information Model: Epever GoMate GM3024N
Battery input voltage range: 8V-32V
Rated current: 30A...
EXTERNAL TEMPERATURE SENSOR FOR EPEVER EPSOLAR CHARGE CONTROLLER The temperature sensor is connected to the charge controller and applied to the battery. This allows the sensor to transmit the exact battery temperature to the charge controller....
The Phocos BCM is an innovative charger for AA batteries. It charges at constant current and limits the voltage to avoid overcharging the batteries. It is possible to charge batteries of different capacities and from different manufacturers, as...
EZA SOLAR MPPT 15A SOLAR REGULATOR Get the most out of your solar system with automatic maximum power point adjustment. Battery charge status consideration. LED operation indicators. Watertight product, therefore usable in all difficult...
SOLAR CHARGE CONTROLLER EPEVER®XTRA 4210N-XDS2 MPPTThe XTRA-N series is the latest member of EPEVER's family of MPPT regulators.
It has improved design and performance based on the previous successful Tracer AN series.
MPPT (Max Power...
This is the MPPT function which ensures a 30% higher efficiency, compared
to classic charge regulators.
Very high tracking efficiency of the maximum power point, equal to or higher
to 99.5%Thanks to this function the...
RS485-USB ADAPTER FOR EPEVER EPSOLAR CHARGE REGULATOR OR INVERTER With the appropriate monitoring software for the controller, you can, for example, track and graphically record solar power, battery voltage and load power in real time and change...
CBE PRS350 Charge regulator for camper photovoltaic panel The PRS350 solar regulator is suitable for operation with 12V photovoltaic modules. Designed and manufactured with innovative electronic techniques, it is characterized by high electrical...
TEMPERATURE SENSOR FOR EPEVER EPSOLAR CHARGE CONTROLLER The temperature sensor is connected to the charge controller and applied to the battery. This allows the sensor to transmit the exact temperature of the battery to the charge controller. This...
Door
the energy autonomy of your camper to the next level with the
new PRM400 solar charge controller from CBE. This device
advanced is the brain of your photovoltaic system, designed to
make the most of every single ray of sunshine,...
EZA MPPT 40A Twilight Solar Photovoltaic Bluetooth charge controller.
Get the most out of your solar system thanks to automatic adjustment of the maximum power point.
Whether you wish to equip your leisure vehicle with one or more solar...
EPSOLAR TRACER 2210AN 20A MPPT charge controller uses the latest technology for these devices. This is the MPPT function that ensures 30% higher efficiency compared to traditional charge regulators. Equipped with built-in multi-function LCD...
Viewed products
Articulated support bracket for shower head. Useful in camper caravans and at home. Made of plastic material. TECHNICAL INFORMATION Material: plastic Color: Chrome Maximum dimensions: diam. 6.5cm by depth 10cm
