The CMM remote display connected to the Phocos CA CML and CMLNL series charge controllers allows you to view:
- Current produced by the photovoltaic panel
- Battery voltage
- Current absorbed by the load (e.g. light bulbs)
The display shows the values on 3 digits and at the same time, the LED indicating which measurement has been selected via the appropriate selector will remain on.
The display is designed for wall or DIN rail mounting.
The supplied cable is 2 meters long for easy and convenient installation.
TECHNICAL INFORMATION
- Voltage: 0 to 35V
- Current: 0 to 25A
- Temperature: -25 to +50°C
- Cable length: 2m
- Dimensions of the measuring terminal block: 84 x 44 x 32 mm
- Display Size: 72 x 68 x 29 mm
- Weight: 195gr including cable
- Protection: IP22 (indoor use)
- CE and RoHS certified
Specific References
- EAN13
- 4260028545587
- MPN
- CMM
16 other products in the same category:
VECHLINE CHARGE REGULATORS - PWM 10A 12/24 V Intelligent charge controller with automatic switch 12/24V. User-friendly LCD screen. PWM technology to ensure optimal charging by increasing battery life. Four working modes available. Suitable for...
EZA SOLAR MPPT 15A SOLAR REGULATOR Get the most out of your solar system with automatic maximum power point adjustment. Battery charge status consideration. LED operation indicators. Watertight product, therefore usable in all difficult...
MPPT charge controller with display EPSOLAR TRACER 3215AN 30A uses the latest technology for these devices. This is the MPPT function that ensures 30% higher efficiency compared to traditional charge regulators. Thanks to this function, the...
SOLAR REGULATOR LCD PWM 20A PWM Smart Pulse solar controllers enable the safe operation of small power solar panels (up to 130W). They effectively protect batteries from overvoltage, deep discharge, short circuits, voltage spikes and sulfation....
This is the MPPT function which ensures a 30% higher efficiency, compared
to classic charge regulators.
Very high tracking efficiency of the maximum power point, equal to or higher
to 99.5%Thanks to this function the...
The CBE PRS300 PHOTOVOLTAIC MODULE REGULATOR is designed and built with innovative electronic techniques that allow maximum performance of the photovoltaic modules connected to it. The regulator is suitable for connecting 12V photovoltaic modules...
NV-1024 YJSS10 CHARGE REGULATOR Campers and campers are increasingly demanding and want all the comforts of home even on vacation. The number of light points and electrical and electronic systems on board has increased exponentially. Televisions,...
EXTERNAL TEMPERATURE SENSOR FOR EPEVER EPSOLAR CHARGE CONTROLLER The temperature sensor is connected to the charge controller and applied to the battery. This allows the sensor to transmit the exact battery temperature to the charge controller....
The PRM350 solar regulator is able to charge lead batteries (liquid, gel and AGM) and 12V lithium batteries automatically by controlling and limiting the energy supplied by the connected photovoltaic modules. It has an MPPT (Maximum Power Point...
EPSOLAR MT50 Backlit LCD Display Voltmeter Ammeter for EPSOLAR LSxxxxB(P) VSxxxxBN TracerxxxxBN(P) Series Charge Controller The display indicates: the voltage and current generated by the panel; the battery voltage; the voltage applied and...
MICRO USB-USB FEMALE ADAPTER FOR EPEVER EPSOLAR CHARGE REGULATOR The Micro USB adapter allows you to connect EPEVER (EPSolar) charge controllers to your Smartphone for easy monitoring and programming. Technical information: Model: CC-OTG-12
New EPEVER GoMate GM3024N 12/24V - 30A charge controller. It is possible to set the type of battery used (GEL, lead, AGM). Technical Information Model: Epever GoMate GM3024N
Battery input voltage range: 8V-32V
Rated current: 30A...
SOLAR REGULATOR MPPT 10A Waterproof IP67 Every solar installation needs a solar charge controller. As the name suggests, this device regulates the solar charge created by your photovoltaic panel to optimize performance and protect your battery....
SOLAR CHARGE CONTROLLER EPEVER®XTRA 4210N-XDS2 MPPTThe XTRA-N series is the latest member of EPEVER's family of MPPT regulators.
It has improved design and performance based on the previous successful Tracer AN series.
MPPT (Max Power...
EPEVER TRACER 4210AN 40A MPPT charge controller uses the latest technology for these devices. This is the MPPT function that ensures 30% higher efficiency compared to traditional charge regulators. Equipped with built-in multi-function LCD...
TEMPERATURE SENSOR FOR EPEVER EPSOLAR CHARGE CONTROLLER The temperature sensor is connected to the charge controller and applied to the battery. This allows the sensor to transmit the exact temperature of the battery to the charge controller. This...
Customers who bought this product also bought:
Pair of 5m Red + 5m Black solar cable with 4mm section. They are flexible cables suitable for installation in photovoltaic systems. Polymer insulation and halogen-free sheath. The period of use under normal conditions is 25 years. They are...
Viewed products
12V Water Pump Switch + 12V Light Switch. This socket can be combined with CBE frames. TECHNICAL INFORMATION CBE MCPL Model No. 1 Double single-pole switch 12V Color Grey RAL7015
