Roof cable gland for campers designed for two cables, but usable up to 6 ways, simply by adding PG13.5 cable glands.
Useful for passing cables from solar panels, cameras, antennas, etc., from the roof of a camper, caravan or boat. A safe passage for your cables without the risk of water infiltration.
It has a hole +5 predispositions and the cover is removable by unscrewing the 4 screws included.
PHOTOVOLTAIC MODULES FIXING SUPPORT Specially designed for the camper - caravan sector Easy to apply to your camper, it is made up of an aluminium support, which can be fixed with a pin and/or glued, and a polyurethane plastic cover, resistant to...
Fixing support for photovoltaic modules to be glued to the camper roof. Specially designed for the camper - caravan sector. Easy to install, no drilling required. Application in a few minutes using polyurethane glue. Also applicable on surfaces...
2-way cable passage kit, for passing cables of solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat. A safe passage for your cables without the risk of water infiltration. This new roof hatch has a groove on the...
1 OR 2 WAY ROOF PASS/CABLE PASS Useful for installing antennas, solar panels and other installation work on campers, caravans, boats, etc. Made of sturdy UV-resistant plastic material. Base with raised edge for perfect gluing and sealing. Safe...
Sheath diameter 12mm. Weather and UV resistant. Suitable for protecting cables in photovoltaic systems. Diameter for CBE KTR-R fitting. PACKAGE CONTENTS CBE KTG Model No. 1 grey sheath Length = 1m To purchase a greater length, simply enter the...
1-way cable passage kit, for passing cables from solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat. Prepared for second way, adding a M20 PG13.5 cable gland A safe passage for your cables without the risk of water...
Pair of MC4 type connectors useful for making a quick and safe connection to photovoltaic modules. The listing includes a male MC4 type connector and a female MC4 type connector, complete with insert, for 2.5-4 mmq cable. Made of sturdy,...
1-way cable passage kit, for passing cables from solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat. A safe passage for your cables without the risk of water infiltration. Suitable for roofs with a maximum...
Pair of 5m Red + 5m Black solar cable with 4mm section. They are flexible cables suitable for installation in photovoltaic systems. Polymer insulation and halogen-free sheath. The period of use under normal conditions is 25 years. They are...
ENJOYSOLAR SOLAR MODULE HOLDER BRACKETS IN WHITE ABS 7 PIECES Number 6 corner supports to fix the photovoltaic panels to the camper caravan boat or any smooth surface. Also supplied with 1 two-way roof cable gland. Easy to install, no drilling...
Fixing support for photovoltaic modules to be glued to the camper roof. Specially designed for the camper - caravan sector. Easy to install, no drilling required. Application in a few minutes using polyurethane glue. Applicable even on surfaces...
1-way cable passage kit - 2m complete with sheath L=2m and cables section 6mmq L=3m. Suitable for completing the installation of photovoltaic panels on the roof of the camper. PACKAGE CONTENTS No. 1 1-way cable passage kit Complete with sheath...
SPACER SUPPORT FOR PHOTOVOLTAIC MODULES Spacer support made of sturdy UV-resistant plastic material. Base with raised edge for perfect and secure gluing. The module can be applied and fixed with screws in the inserts provided, or, in turn, glued...
Number 2 side supports to fix the photovoltaic panels to the camper, caravan, boat or any smooth surface. Easy to install, no drilling required. Application in a few minutes using polyurethane glue ABS model CHARACTERISTICS UV resistant Material:...
PG11 cable gland complete with nut and gasket. The cable gland allows the cables to pass through the cable gland in a watertight manner. The CBE KTR-P is suitable for the CBE KT5 roof cable gland. PACKAGE CONTENTS Model CBE KTR-P Gray color
PHOTOVOLTAIC MODULES FIXING SUPPORT Specially designed for the camper - caravan sector Easy to apply to your camper, it is made up of an aluminium support, which can be fixed with a pin and/or glued, and a polyurethane plastic cover, resistant to...
Fixing support for photovoltaic modules to be glued to the camper roof. Specially designed for the camper - caravan sector. Easy to install, no drilling required. Application in a few minutes using polyurethane glue. Also applicable on surfaces...
2-way cable passage kit, for passing cables of solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat. A safe passage for your cables without the risk of water infiltration. This new roof hatch has a groove on the...
1 OR 2 WAY ROOF PASS/CABLE PASS Useful for installing antennas, solar panels and other installation work on campers, caravans, boats, etc. Made of sturdy UV-resistant plastic material. Base with raised edge for perfect gluing and sealing. Safe...
Sheath diameter 12mm. Weather and UV resistant. Suitable for protecting cables in photovoltaic systems. Diameter for CBE KTR-R fitting. PACKAGE CONTENTS CBE KTG Model No. 1 grey sheath Length = 1m To purchase a greater length, simply enter the...
1-way cable passage kit, for passing cables from solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat. Prepared for second way, adding a M20 PG13.5 cable gland A safe passage for your cables without the risk of water...
Pair of MC4 type connectors useful for making a quick and safe connection to photovoltaic modules. The listing includes a male MC4 type connector and a female MC4 type connector, complete with insert, for 2.5-4 mmq cable. Made of sturdy,...
Fixing support for photovoltaic modules to be glued to the camper roof. Specially designed for the camper - caravan sector. Easy to install, no drilling required. Application in a few minutes using polyurethane glue. Applicable even on surfaces...
LITTELFUSE MEGAVAL series fuse. MegaVAL® Fuses comply with ISO 8820-5, the recommended standard for the protection of wires carrying high currents. MegaVAL® 100A fuses are made of zinc alloy. The dedicated fuse holder (CBE R459) is available in...
Module with a 9.5 75 Ohm TV socket and a 75 Ohm F satellite socket. The module is gray and built-in. CBE MPTVS Model The panel can be combined with the frames of the ?MODULAR PLATES? series PACKAGE CONTENTS No. 1 Fuse holder module with 4 fuses...
INTERNAL/EXTERNAL BUILT-IN TELESCOPIC GRILLE IN PLASTIC MATERIAL Rectangular plastic recessed grilles. With mosquito net. Fixing with screws (not included). For ventilation and insect protection, bathroom ventilation, kitchen, easy to install....
FOR SALE ONLY TO VAT NUMBER HOLDERS Sikaflex®-221 300 ml cartridge, colour White This single-component polyurethane sealant is essential both for annually re-sealing our camper's seals such as portholes, roof vents and the most critical joints,...
White door stopper suitable for stopping the storage compartments outside the camper. It has a spring to speed up the locking of the storage compartment door. Fixing with screws not supplied in the package. TECHNICAL INFORMATION White color...
KIT FRAME VENT 40 FOR FIAT DUCATO from 2006 X250 X290 Interface specifically designed to allow the installation of Vent 40 and Turbo-Vent rooflights on Ducato, adapting them to the surface of the vehicle. Frame Kit 40 Ducato: for 40×40 portholes...
Fixing support for photovoltaic modules to be glued to the camper roof. Specially designed for the camper - caravan sector. Easy to install, no drilling required. Application in a few minutes using polyurethane glue. Applicable even on surfaces...
LITTELFUSE MEGAVAL series fuse. MegaVAL® Fuses comply with ISO 8820-5, the recommended standard for the protection of wires carrying high currents. MegaVAL® 100A fuses are made of zinc alloy. The dedicated fuse holder (CBE R459) is available in...
Module with a 9.5 75 Ohm TV socket and a 75 Ohm F satellite socket. The module is gray and built-in. CBE MPTVS Model The panel can be combined with the frames of the ?MODULAR PLATES? series PACKAGE CONTENTS No. 1 Fuse holder module with 4 fuses...
INTERNAL/EXTERNAL BUILT-IN TELESCOPIC GRILLE IN PLASTIC MATERIAL Rectangular plastic recessed grilles. With mosquito net. Fixing with screws (not included). For ventilation and insect protection, bathroom ventilation, kitchen, easy to install....
FOR SALE ONLY TO VAT NUMBER HOLDERS Sikaflex®-221 300 ml cartridge, colour White This single-component polyurethane sealant is essential both for annually re-sealing our camper's seals such as portholes, roof vents and the most critical joints,...
White door stopper suitable for stopping the storage compartments outside the camper. It has a spring to speed up the locking of the storage compartment door. Fixing with screws not supplied in the package. TECHNICAL INFORMATION White color...
KIT FRAME VENT 40 FOR FIAT DUCATO from 2006 X250 X290 Interface specifically designed to allow the installation of Vent 40 and Turbo-Vent rooflights on Ducato, adapting them to the surface of the vehicle. Frame Kit 40 Ducato: for 40×40 portholes...
