Fixing support for photovoltaic modules to be glued to the camper roof. Specially designed for the camper - caravan sector.
Easy to install, no drilling required. Application in a few minutes using polyurethane glue.
Applicable even on surfaces that are not perfectly flat. Lightweight and aerodynamic.
Anodized aluminum structure, easy to shorten to fit your photovoltaic module.
PACKAGE CONTENTS
- Pair of aluminum brackets
- 4 self-tapping screws to fix the panel to the brackets
CHARACTERISTICS
- Model: CBE KFPN670
- Code: 250425
- Dimensions: 670 x 60 x 53 mm
16 other products in the same category:
1-way cable passage kit, for passing cables from solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat. A safe passage for your cables without the risk of water infiltration. Suitable for roofs with a maximum...
Pair of MC4 Y-type connectors with which it is possible to create parallel connections between two photovoltaic panels quickly and safely. The listing offers a Y-connector for 2.5-4 mmq cable. Made of sturdy, UV-resistant material. TECHNICAL...
Number 4 corner supports to fix the photovoltaic panels to the camper caravan boat or any smooth surface. Easy to install, no drilling required Application in a few minutes using polyurethane glue ABS model CHARACTERISTICS UV resistant Material:...
ENJOYSOLAR SOLAR MODULE HOLDER CORNERS IN WHITE ABS Number 4 corner supports to fix the photovoltaic panels to the camper caravan boat or any smooth surface. Easy to install, no drilling required Application in a few minutes using polyurethane...
Pair of 5m Red + 5m Black solar cable with 4mm section. They are flexible cables suitable for installation in photovoltaic systems. Polymer insulation and halogen-free sheath. The period of use under normal conditions is 25 years. They are...
SIDE SUPPORT SOLAR MODULE ENJOYSOLAR ABS 180MM WHITE Number 2 corner supports to fix the photovoltaic panels to the camper caravan boat or any smooth surface. Easy to install, no drilling required Application in a few minutes using polyurethane...
EZA SOLAR 2-way CABLE GLAND Cable passage kit for passing cables of solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat. A safe passage for your cables without the risk of water infiltration. It has a pg13 cable...
Sheath fixer. The CBE KTR-F is suitable for fixing the 12mm CBE KTR-G sheath to the roof of the camper or boat. PACKAGE CONTENTS Model CBE KTR-F Gray color
Fixing support for photovoltaic modules to be glued to the camper roof. Specially designed for the camper - caravan sector. Easy to install, no drilling required. Application in a few minutes using polyurethane glue. Also applicable on surfaces...
Roof cable gland for campers designed for two cables, but usable up to 6 ways, simply by adding PG13.5 cable glands. Useful for passing cables from solar panels, cameras, antennas, etc., from the roof of a camper, caravan or boat. A safe passage...
1 OR 2 WAY ROOF PASS/CABLE PASS Useful for installing antennas, solar panels and other installation work on campers, caravans, boats, etc. Made of sturdy UV-resistant plastic material. Base with raised edge for perfect gluing and sealing. Safe...
TWILIGHT SENSOR 12V ac/dc 10A Thanks to this twilight switch, working at 12V ac/dc, it is possible to enable in photovoltaic systems or in any case in low voltage systems, LED lights, security cameras, control systems, fence energizers etc... It...
2-way cable passage kit, for passing cables of solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat. A safe passage for your cables without the risk of water infiltration. This new roof hatch has a groove on the...
PHOTOVOLTAIC MODULES FIXING SUPPORT Specially designed for the camper - caravan sector Easy to apply to your camper, it is made up of an aluminium support, which can be fixed with a pin and/or glued, and a polyurethane plastic cover, resistant to...
Number 2 side supports to fix the photovoltaic panels to the camper, caravan, boat or any smooth surface. Easy to install, no drilling required. Application in a few minutes using polyurethane glue ABS model CHARACTERISTICS UV resistant Material:...
Prodotto eccellente di buona fattura e robustezza, esteticamente ,belli
Customers who bought this product also bought:
Fuse holder for LITTELFUSE MEGAVAL series fuse. Supports 100A 200A and 500A fuses It features Grover bolts and 8 nuts to securely fasten both large fuses and cable lugs. Complete with lid and fixing holes. An object that should never be missing...
FOR SALE ONLY TO VAT NUMBER HOLDERS Sikaflex®-252 is a one-component, thixotropic, paste-like polyurethane adhesive that cures by reacting with atmospheric moisture to form a tough elastomer. Great for gluing solar panel brackets on campers,...
LITTELFUSE MEGAVAL series fuse. MegaVAL® Fuses comply with ISO 8820-5, the recommended standard for the protection of wires carrying high currents. MegaVAL® 100A fuses are made of zinc alloy. The dedicated fuse holder (CBE R459) is available in...
Shower with push button for camper or boat. Also useful in the garden or at home. Thanks to the button on the shower head, you can save a lot of water. TECHNICAL INFORMATION Chrome head model Material: Shockproof Valve: brass Connection: 1/2"
Shurflo® Pump Filter. Installs directly into pump with hose barb threaded connection. Useful in campers, boats and caravans, to preserve the pump. Thanks to this filter, you will no longer have to disassemble the pump for periodic cleaning....
Useful flying fuse holder in blister pack for 50A blade fuses. Complete with cable lug. An object that should never be missing for carrying out safe installations in cars, campers, boats and for the installation of photovoltaic kits. PACKAGE...
