1-way cable passage kit, for passing cables from solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat. A safe passage for your cables without the risk of water infiltration. Suitable for roofs with a maximum thickness of 60mm.
PHOTOVOLTAIC MODULES FIXING SUPPORT Specially designed for the camper - caravan sector Easy to apply to your camper, it is made up of an aluminium support, which can be fixed with a pin and/or glued, and a polyurethane plastic cover, resistant to...
Pair of MC4 type connectors useful for making a quick and safe connection to photovoltaic modules. The listing includes a male MC4 type connector and a female MC4 type connector, complete with insert, for 2.5-4 mmq cable. Made of sturdy,...
TWILIGHT SENSOR 12V ac/dc 10A Thanks to this twilight switch, working at 12V ac/dc, it is possible to enable in photovoltaic systems or in any case in low voltage systems, LED lights, security cameras, control systems, fence energizers etc... It...
2-way cable passage kit, for passing cables of solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat. A safe passage for your cables without the risk of water infiltration. This new roof hatch has a groove on the...
SIDE SUPPORT SOLAR MODULE ENJOYSOLAR ABS 180MM WHITE Number 2 corner supports to fix the photovoltaic panels to the camper caravan boat or any smooth surface. Easy to install, no drilling required Application in a few minutes using polyurethane...
Fixing support for photovoltaic modules to be glued to the camper roof. Specially designed for the camper - caravan sector. Easy to install, no drilling required. Application in a few minutes using polyurethane glue. Also applicable on surfaces...
Number 2 side supports to fix the photovoltaic panels to the camper, caravan, boat or any smooth surface. Easy to install, no drilling required. Application in a few minutes using polyurethane glue ABS model CHARACTERISTICS UV resistant Material:...
1 OR 2 WAY ROOF PASS/CABLE PASS Useful for installing antennas, solar panels and other installation work on campers, caravans, boats, etc. Made of sturdy UV-resistant plastic material. Base with raised edge for perfect gluing and sealing. Safe...
Roof cable gland for campers designed for two cables, but usable up to 6 ways, simply by adding PG13.5 cable glands. Useful for passing cables from solar panels, cameras, antennas, etc., from the roof of a camper, caravan or boat. A safe passage...
SPACER SUPPORT FOR PHOTOVOLTAIC MODULES Spacer support made of sturdy UV-resistant plastic material. Base with raised edge for perfect and secure gluing. The module can be applied and fixed with screws in the inserts provided, or, in turn, glued...
PG11 cable gland complete with nut and gasket. The cable gland allows the cables to pass through the cable gland in a watertight manner. The CBE KTR-P is suitable for the CBE KT5 roof cable gland. PACKAGE CONTENTS Model CBE KTR-P Gray color
1-way cable passage kit - 2m complete with sheath L=2m and cables section 6mmq L=3m. Suitable for completing the installation of photovoltaic panels on the roof of the camper. PACKAGE CONTENTS No. 1 1-way cable passage kit Complete with sheath...
Z-shaped brackets for fixing photovoltaic panels to bars or plates of campers, caravans, boats or any other surface. Set of 4 pieces, complete with hardware. TECHNICAL INFORMATION Material: Aluminum Max Height: 38 mm PACKAGE CONTENTS 4 Aluminum...
Fixing support for photovoltaic modules to be glued to the camper roof. Specially designed for the camper - caravan sector. Easy to install, no drilling required. Application in a few minutes using polyurethane glue. Applicable even on surfaces...
Sheath diameter 12mm. Weather and UV resistant. Suitable for protecting cables in photovoltaic systems. Diameter for CBE KTR-R fitting. PACKAGE CONTENTS CBE KTG Model No. 1 grey sheath Length = 1m To purchase a greater length, simply enter the...
SCREW COVER CAP WITH BASE Suitable for a wide range of screw sizes, the strong and durable washer reduces insertion/assembly times. Provides a precise and clean finish. Version Ø 10 mm internal and ø 12 mm external ( ideal for restoring bands,...
