PHOTOVOLTAIC ACCESSORIES
PHOTOVOLTAIC ACCESSORIES There are 30 products.
Active filters
12mm CBE KTR-G Anti UV Sheath 1 Meter for Photovoltaic Panel
12mm diameter sheath. Resistant to atmospheric agents and UV rays. Suitable for protecting cables in photovoltaic systems. Diameter for CBE KTR-R fitting. PACKAGE CONTENTS CBE KTG model N° 1 gray sheath length = 1m To purchase a...
Camper Roof Cable Grommet Eza Solar 2 Way Solar Antenna
EZA SOLAR 2-way CABLE GLAND Cable passage kit for passing cables of solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat. A safe passage for your cables without the risk of water infiltration. It has a pg13 cable...
CBE KTR-P PG11 cable gland for KT5 camper roof cable gland
PG11 cable gland complete with nut and gasket. The cable gland allows the cables to pass inside the cable gland in a watertight manner. The CBE KTR-P is suitable for the CBE KT5 roof cable gland. PACKAGE CONTENTS CBE KTR-P model...
Spacer Support for Photovoltaic Modules for campers
SPACER SUPPORT FOR PHOTOVOLTAIC MODULES Spacer support made of sturdy UV-resistant plastic material. Base with raised edge for perfect and safe gluing. The module can be applied and fixed with screws in the inserts provided, or, in turn,...
CBE KTR-R 12mm Sheath Fitting for KT5 Camper Roof Cable Grommet
Fitting for 12mm diameter sheath. The CBE KTR-R is a straight PG11 fitting, suitable for connecting a 12mm conduit to the CBE KT5 roof cable gland. Once inserted, the sheath locks automatically, making installation quick and easy. Does not...
VechLine 1 Way Camper Roof Cable Entry for Photovoltaic Antenna
1-way cable routing kit, for routing cables of solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat. Prepared for a second route, adding an M20 PG13.5 cable glandA safe passage for your cables without risk of...
Vecamplast 1-Way Cable Entry for Camper Caravan Roof
1 OR 2 WAY ROOF HOLDER/CABLE HOLDER Useful for installing antennas, solar panels and other installation work on campers, caravans, boats, etc. Made of sturdy UV-resistant plastic material. Base with raised edge for perfect gluing and...
Solar Module Side Supports For Camper ABS White
SIDE SUPPORT SOLAR MODULE ENJOYSOLAR ABS 180MM WHITE Number 2 corner supports to fix the photovoltaic panels to the camper caravan boat or any smooth surface. Easy to install, no drilling required Application in a few minutes using polyurethane...
Pair of Connectors Compatible with MC4 Y Parallel Photovoltaic Panel
Pair of MC4 Y-type connectors with which it is possible to make the parallel between two photovoltaic panels quickly and safely. The listing offers a Y-connector for 2.5-4 mm2 cable. Made of sturdy and UV-resistant material. TECHNICAL...
Solar module holder corners for Camper in ABS 4 pieces white
ENJOYSOLAR SOLAR MODULE HOLDER CORNERS IN WHITE ABS Number 4 corner supports to fix the photovoltaic panels to the camper caravan boat or any smooth surface. Easy to install, no drilling required Application in a few minutes using polyurethane...
CBE KFPN530 Photovoltaic Panel Fixing Brackets to be Glued to Camper Roof
Photovoltaic module fixing support to be glued to the roof of the camper. Studied specifically for the camper - caravan sector. Easy to install, no need of punctures. Application in a few minutes using polyurethane glue. Also...
CBE KTR-F Fixed 12mm Sheath for Camper Photovoltaic Panel Wiring
Sheath holder. The CBE KTR-F is suitable for fixing the 12mm CBE KTR-G sheath on the roof of the camper or boat PACKAGE CONTENTS CBE KTR-F model Grey colour
Roof Cable Gland KIT + CBE KT1-20 Cable for Camper Cabin
1-way cable passage kit - 2m complete with sheath L=2m and cables section 6mmq L=3m. Suitable for completing the installation of photovoltaic panels on the roof of the camper. PACKAGE CONTENTS No. 1 1-way cable passage kit Complete with sheath...
CBE KFPN670 Photovoltaic Panel Fixing Brackets to be Glued to Camper Roof
Photovoltaic module fixing support to be glued to the roof of the camper. Studied specifically for the camper - caravan sector.Easy to install, not requires drilling. Application in a few minutes using glue polyurethane. Can...
Twilight Sensor 12V External 10A Switch for Solar PhotovoltaicLED
Twilight SENSOR 12V ac/dc 10A Thanks to this twilight switch, operating at 12V AC/DC, it is possible to enable LED lights, security cameras, control systems, fence energizers, etc. in photovoltaic systems or in any case in low voltage...
Cable Grommet for One Way Camper Roof CBE KT1 Solar Panel Antenna
1-way cable routing kit, for passing cables of solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat.A safe passage for your cables without risk of water infiltration. Suitable for roofs maximum thickness...
Cable Grommet for Camper Roof 5 Way CBE KT5 Solar Panel Antenna
5-way cable gland for the passage of cables of solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat A safe passage for your cables without risk of water infiltration. It has one hole + 2 already pre-cut. It is...
Roof Cable Entry KIT + CBE KT1-10 Cable for Camper Cabin
1 way cable passage kit - 1m complete with sheath L=1m and 6mm2 section cables L=2m. Suitable for completing the installation of photovoltaic panels on the roof of the camper. PACKAGE CONTENTS N° 1 1-way cable...
CBE KT5-C20 3 Meter Cable Wiring KIT for Photovoltaic Panel
Wiring kit for KT5 cable gland - 2m CBE KT5-C20 model composed of a sheath L=2m and two 6mm2 cables L=3m. Complete with PG11 fittings and cable lugs for connection to the photovoltaic module. Ideal for the connection...
CBE KT5-C10 2 Meter Cable Wiring KIT for Photovoltaic Panel
Wiring kit for KT5 cable gland - 1m. CBE KT5-C10 model. composed of a sheath L=1m and two 6mm2 cables L=2m. Complete with PG11 fittings and cable lugs for connection to the photovoltaic module. Ideal for the connection between...
EvolutionSun 550 mm Photovoltaic Panel Fixing Brackets for Campers
FIXING SUPPORT FOR SOLAR MODULES Specially designed for the camper - caravan sector Easy to apply to your camper, it is made up of an aluminum support, which can be pinned and/or glued, and a polyurethane plastic cover, resistant to UV...
Side Brackets for Camper Solar Panel Fixing
Number 2 side supports to fix the photovoltaic panels to the camper, caravan, boat or any smooth surface. Easy to install, no drilling required. Application in a few minutes using polyurethane glue ABS model FEATURES UV...
Angular Fixing Brackets for Camper Solar Panel
Number of 4 corner supports to fix the photovoltaic panels to the camper, caravan, boat or any smooth surface. Easy to install, no drilling required Application in a few minutes using polyurethane glue ABS model FEATURES UV...
EvolutionSun 670 MM Photovoltaic Panel Fixing Brackets for Campers
FIXING SUPPORT FOR SOLAR MODULES Specially designed for the camper - caravan sector Easy to apply to your camper, it is made up of an aluminum support, which can be pinned and/or glued, and a polyurethane plastic cover, resistant to UV...
VechLine Two Way Solar Antenna Cable Entry for Camper Roof
2-way cable routing kit, for passing cables of solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat. A safe passage for your cables without risk of water infiltration. This new roof entry has a groove on the...
KIT Pair of 3M Red Black Solar Cable 4 mm Compatible with MC4 Photovoltaic
Pair of 3m Red + 3m Black solar cable with 4mm2 section.These are flexible cables suitable for installation in photovoltaic systems.Polymer insulation and halogen-free sheath. The period of use in normal conditions is 25 years.They are headed...
Corner and Side Brackets
ENJOYSOLAR SOLAR MODULE HOLDER BRACKETS IN WHITE ABS 7 PIECES Number 6 corner supports to fix the photovoltaic panels to the camper caravan boat or any smooth surface. Also supplied with 1 two-way roof cable gland. Easy to install, no drilling...
KIT Pair of Red Black Solar Cable 4mm 5M Compatible with MC4 Photovoltaic
Pair of 5 m Red + 5 m Black solar cable with 4 mm section.These are flexible cables suitable for installation in photovoltaic systems.Polymer insulation and halogen-free sheath. The period of use in normal conditions is 25 years.They are headed...
VeeTech Multibox Watertight Cable Grommet for Camper Roof with Two PG13.5 6 Ways
Roof cable gland for camper designed for two cables, but usable up to 6 ways, simply adding PG13.5 cable glands. Useful for passing cables of solar panels, cameras, antennas, etc., from roof of the camper, caravan or boat. A safe...
Pair of Connectors Compatible with MC4 Solar Photovoltaic Panel
Pair of MC4 type connectors useful for making a quick and safe connection to photovoltaic modules. The listing offers a male MC4 type connector and a female MC4 type connector, complete with insert, for 2.5-4 mm2 cable. Made of sturdy and...