Spacer support made of sturdy UV-resistant plastic material.
Base with raised edge for perfect and secure gluing.
The module can be applied and fixed with screws in the inserts provided, or, in turn, glued onto the ?L? base. For safe gluing and sealing, use Sika 252 ( NOT INCLUDED )
TWILIGHT SENSOR 12V ac/dc 10A Thanks to this twilight switch, working at 12V ac/dc, it is possible to enable in photovoltaic systems or in any case in low voltage systems, LED lights, security cameras, control systems, fence energizers etc... It...
PHOTOVOLTAIC MODULES FIXING SUPPORT Specially designed for the camper - caravan sector Easy to apply to your camper, it is made up of an aluminium support, which can be fixed with a pin and/or glued, and a polyurethane plastic cover, resistant to...
Number 2 side supports to fix the photovoltaic panels to the camper, caravan, boat or any smooth surface. Easy to install, no drilling required. Application in a few minutes using polyurethane glue ABS model CHARACTERISTICS UV resistant Material:...
PG11 cable gland complete with nut and gasket. The cable gland allows the cables to pass through the cable gland in a watertight manner. The CBE KTR-P is suitable for the CBE KT5 roof cable gland. PACKAGE CONTENTS Model CBE KTR-P Gray color
ENJOYSOLAR SOLAR MODULE HOLDER CORNERS IN WHITE ABS Number 4 corner supports to fix the photovoltaic panels to the camper caravan boat or any smooth surface. Easy to install, no drilling required Application in a few minutes using polyurethane...
1-way cable passage kit - 2m complete with sheath L=2m and cables section 6mmq L=3m. Suitable for completing the installation of photovoltaic panels on the roof of the camper. PACKAGE CONTENTS No. 1 1-way cable passage kit Complete with sheath...
Sheath fixer. The CBE KTR-F is suitable for fixing the 12mm CBE KTR-G sheath to the roof of the camper or boat. PACKAGE CONTENTS Model CBE KTR-F Gray color
1-way cable passage kit, for passing cables from solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat. A safe passage for your cables without the risk of water infiltration. Suitable for roofs with a maximum...
Fixing support for photovoltaic modules to be glued to the camper roof. Specially designed for the camper - caravan sector. Easy to install, no drilling required. Application in a few minutes using polyurethane glue. Applicable even on surfaces...
1-way cable passage kit, for passing cables from solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat. Prepared for second way, adding a M20 PG13.5 cable gland A safe passage for your cables without the risk of water...
Pair of MC4 Y-type connectors with which it is possible to create parallel connections between two photovoltaic panels quickly and safely. The listing offers a Y-connector for 2.5-4 mmq cable. Made of sturdy, UV-resistant material. TECHNICAL...
EZA SOLAR 2-way CABLE GLAND Cable passage kit for passing cables of solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat. A safe passage for your cables without the risk of water infiltration. It has a pg13 cable...
ENJOYSOLAR SOLAR MODULE HOLDER BRACKETS IN WHITE ABS 7 PIECES Number 6 corner supports to fix the photovoltaic panels to the camper caravan boat or any smooth surface. Also supplied with 1 two-way roof cable gland. Easy to install, no drilling...
