Useful battery switch for cars, campers and boats with low height, with removable knob. It has a rear thread, with ring nut, so that it can be screwed flush into a wall, such as one side of the base of the camper seats. convenient as a master...
CAR BATTERY CONTAINER 12V 100Ah Made of plastic material. Resistant to acids and petroleum products. Sold with a strap for closing and carrying. TECHNICAL INFORMATION Model: Koala Plastic Material Dimensions: 185x355xh263 mm
Useful battery disconnect switch for car camper and boat: convenient as a switch, with cap and removable key to carry out work on the electrical system as a simple but effective anti-theft device PACKAGE CONTENTS No. 1 Battery switch with cap No....
Alligator clips with 1.4 meter cable and cigarette lighter socket with cap. Model suitable for 12V/24V batteries. TECHNICAL INFORMATION Cable length: 1.4m Working voltage: 12V 24V
Pair of battery clamps with pin. The two terminals have different dimensions: Large positive pole Small negative pole TECHNICAL DATA Material: Bronze Cable Size: 25-40mmq Maximum current: 420A Pin Bolt: M10 Clamp Bolt: M6 Positive Pole Entry Hole:...
BATTERY POLY ADAPTER M6 BOLT Pair of adapters for battery poles with M6 thread. Built in a conical shape. Very useful for converting the poles with bolts of AGM batteries, into normal large poles such as those for car batteries. It is thus...
Battery terminal kit + plastic terminal cover caps. This product ensures a secure connection to the batteries, making it easy to connect cables in your camper, boat or photovoltaic system. Product CBE R331
BATTERY POLY ADAPTER M8 BOLT Pair of adapters for battery poles with M8 thread. They are made of brass and have a conical shape. Very useful for converting the bolt terminals of AGM batteries into normal large terminals such as those found on car...
Battery selector with contacts protected against accidental short circuit by a body, with removable bottom cover. Side walls designed for cable exit in the desired position. 4-position battery selector switch, useful in campers and boats Model...
Useful waterproof flying fuse holder, with 10A fuse for car camper and boat. An object that should never be missing to carry out safe installations, including the installation of photovoltaic kits. PACKAGE CONTENTS No. 1 watertight flying fuse...
Pair of 3m Red + 3m Black solar cables with 4mmq section. They are flexible cables suitable for installation in photovoltaic systems. Polymer insulation and halogen-free sheath. The period of use under normal conditions is 25 years. They are...
The CSB40/SP separator is used for parallel charging of car and service batteries. It is suitable for 2 batteries max 120Ah 12V. The parallel occurs when the engine is started. In this way the alternator recharges both batteries. At the same time,...
This is the MPPT function which ensures a 30% higher efficiency, compared
to classic charge regulators.
Very high tracking efficiency of the maximum power point, equal to or higher
to 99.5%Thanks to this function the...
ENJOYSOLAR SOLAR MODULE HOLDER BRACKETS IN WHITE ABS 7 PIECES Number 6 corner supports to fix the photovoltaic panels to the camper caravan boat or any smooth surface. Also supplied with 1 two-way roof cable gland. Easy to install, no drilling...
