1 - Battery Charger 12V 10A CBE CB510-3 Lead Gel Camper Boat
  • 1 - Battery Charger 12V 10A CBE CB510-3 Lead Gel Camper Boat

Battery Charger 12V 10A CBE CB510-3 Lead Gel Camper Boat

1993
135.00
Tax included available in 10/20 days
Quantity
On order in 10/20 days

The CBE CB510-3 ?CB500? series switching battery charger is able to charge lead batteries (lead-acid and lead-gel) automatically. The battery charger is protected against overtemperature and the 12V outputs are protected against short circuit and reverse polarity.

Six-step charging system for 12V batteries:

  • Desulphation: when the battery charger is turned on, only if the battery needs it, it is charged at a voltage of 15.2V until the current exceeds 2A or in any case for a maximum of 2 hours.
  • Bulk: battery charge with maximum current until the end-of-charge voltage is reached. NB: The end-of-charge voltage is reached only if the battery is efficient
  • Absorption: Completion of battery charging with constant end-of-charge voltage for the time defined by the charging line with progressive reduction of current.
  • Float: Maintenance charge at constant voltage for a maximum of 15 hours. High battery absorption causes the Bulk phase to restart.
  • Stand-by: The battery charger no longer supplies energy and switches to the Refresh phase only when the battery voltage drops below 13V.
  • Refresh: The battery is charged at the Bulk charging voltage for a maximum of 1h; this phase is designed to compensate for the battery's self-discharge during any prolonged periods of inactivity. Charging then restarts from the Float phase.

High frequency switching technology allows for high efficiency with reduced weight and size.

TECHNICAL INFORMATION

  • Model: CB510-3
  • Nominal Voltage: 230Vac +-10%
  • Frequency: 50/60 Hz
  • Maximum power: 150W
  • Protection fuse: T 3.15A (glass 5x20)
  • Safety switch: 230V ( illuminated )
  • Bulk voltage ( maximum ): 14.1V - 14.4V - 14.7V
  • Float Voltage ( minimum ): 13.5V - 13.8V
  • Maximum current: 10A
  • Charging line: IUoU
  • Battery type selector: Pb-Acid / Pb-Gel
  • Charging line selector: 3 positions ( A - B - C )
  • Short circuit and reverse polarity protection: 15A ( blade )
  • Thermal protection: Yes
  • Network presence signal: 12V; 50mA
  • Yield: 86%
  • Ambient temperature: 0 - +50°C
  • Ventilation: No
  • Low Voltage Directive: 2014/35/EU
  • Electromagnetic Compatibility Directive: 2014/30/EU
  • Connection to the mains: Schuko plug
  • Battery connection: Terminal 6.3
  • Temperature sensor: optional
  • Dimensions: 180x140x85 mm
  • Weight: 1 Kg
New
1993

Data sheet

1993
CBE

Specific References

EAN13
8033123267069