The PS2-100 pumps are a small 100W system designed to fit into low cost mass market systems. This ready-to-use product provides a solution that is very easy to install even by a non-professional ( no wiring, cable splicing or special connections required! ). The kit includes the controller, pump, cable with motor connector and MC4 cable adapter. The PS2-100 system provides more than 20,000 liters of water per day and pumps up to 40 meters high. Thanks to the fact that it is a submersible pump, it can be used in various contexts such as wells, ponds, rivers, lakes or cisterns. Common applications include water management for livestock, irrigation, gardens... Direct connection to the photovoltaic without the use of batteries. This makes the system less expensive, more reliable and requires less maintenance.
Technical features:
Pump length: 455 mm
Pump diameter: 88 mm
Pump weight: 5.5 Kg
Controller height: 29mm
Controller length: 115mm
Cable length: 15m
Controller depth: 122mm
Weight of the roller: 700 g
Pump material: stainless steel, stainless steel
Controller material: aluminum, resin
Controller power: 0.15 kW
Controller voltage : 50V
Vmp** optimal controller : >34 V
Controller motor current : 6.0A
Controller efficiency: 98%
Controller protection level: IP68
Rated pump power: 0.15 kW
Pump efficiency: 83%
Pump motor speed: 700-2,500 rpm
Pump insulation class: F
Pump protection level: IP68
Pump immersion: max 50 cm
m 3of water per day: 7 m 3
Head: 40m
Included in the kit:
controller with connections for photovoltaic modules, pump, dry run protection and float switch for full tank
engine with its socket
helical rotor pump
motor cable with plug
Bracket for mounting the controller under the photovoltaic module
Kit consisting of a 12V SEAFLO Dimatec SFRV1 PUMP with fittings and filter. The patented design ensures smooth flow in all conditions of use. The motor is balanced and mounted on bearings for maximum durability and also integrates a thermal...
Extend the life of your pump by installing this filter. Prevent your 12V water pump from getting blocked or damaged by dirt. TECHNICAL INFORMATION Filter for Comet pumps, AURO and SUPERLUXUS models Manufacturer: Dimatec
The only self-priming pump with built-in filter and with the Silent Plate anti-vibration base as standard. The pump automatically sucks and pumps water up to a height of over 3 meters. The stainless steel filter prevents the entry of impurities...
Submersible pump, large flow. The turbine is equipped with adjustable blades that improve the water flow. Power from 10 to 18 W. It works vertically. It has a maximum head of 5 metres. Extremely quiet. In combination with our photovoltaic kit, it...
12V inline water pump. Pump that is installed outside the tank or as a support for a submersible pump. In combination with our photovoltaic kit, it is possible to create a simple irrigation system in any place not served by an electrical system....
SHURFLO PUMP 2095-204-412 TRAIL KING 7 20 PSI It is a self-priming pump that allows you to connect multiple delivery points. It continues to function without damage if the water runs out. Suitable for use on mobile vehicles such as campers or...
Submersible pump, effective and economical. The turbine is equipped with adjustable blades that improve the water flow. Power from 10 to 18 W. It works vertically. It has a maximum head of 5 meters. Extremely silent. In combination with our...
Kit consisting of a 12V submersible water pump and a 30W 230V / 12Vdc waterproof power supply. The pump is immersed directly into the tank and can be used for various purposes: To create a sink using tanks, where a water loading/unloading point is...
PS2-100 HR-23 pump KIT (photovoltaic panels excluded) The PS2-100 pumps are a small 100W system designed to fit into low cost mass market systems. This ready to use product provides a solution that is very easy to install even by a...
Extend the life of your pump by installing this filter. Prevent your 12V water pump from getting blocked or damaged by dirt. TECHNICAL INFORMATION Filter ø 10mm for submersible pump or inline pump
Submersible water pump operating at 12V, model MAAS 15 The pump is immersed directly into the tank and can be used for various purposes: In a camper or boat as a simple external shower In the boat as a bilge pump To fill the internal tank of the...
Nylon elbow fitting for flexible hoses. Suitable for drinking water systems on camper pumps. It has a 1/2 inch thread on one side. Therefore convenient for connecting 12V water pumps used on campers and boats. TECHNICAL INFORMATION Shurflo 1/2? -...
Non-automatic bilge pump operating at 12Vdc, 3100 litres/hour. Sturdy and compact construction, it has a removable filter for easy cleaning. The filter base features 4 mounting holes and conforms to industry standard mounting conventions. Our...
12V Water Pump Switch + 12V Light Switch. This socket can be combined with CBE frames. TECHNICAL INFORMATION CBE MCPL Model No. 1 Double single-pole switch 12V Color Grey RAL7015
Shurflo® Pump Filter. Installs directly into pump with hose barb threaded connection. Useful in campers, boats and caravans, to preserve the pump. Thanks to this filter, you will no longer have to disassemble the pump for periodic cleaning....
1 voti
