Safety Drain Valve ABO 2.8bar for Truma Camper Boiler
SAFETY DRAIN VALVE ABO 2.8 BAR FOR TRUMA BOILERS TECHNICAL INFORMATION Brand: Truma Manufacturer code: 70142-05 Operating pressure: 2.8 mbar Exhaust connection diameter: 12mm (John Guest system)
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
800mm flexible gas hose for connection between the 8mm fixed pipe of the camper, caravan and caravan, to the pressure regulator with H.4 G1/4 LH connection
The end fittings are made of steel.
TECHNICAL INFORMATION
Data sheet
Specific References
16 other products in the same category:
SAFETY DRAIN VALVE ABO 2.8 BAR FOR TRUMA BOILERS TECHNICAL INFORMATION Brand: Truma Manufacturer code: 70142-05 Operating pressure: 2.8 mbar Exhaust connection diameter: 12mm (John Guest system)
400mm high pressure gas hose for connection between gas cylinder and gas pressure regulator for campers, caravans, caravans and home. Equipped with steel fittings for Italian connection. TECHNICAL INFORMATION Length: 400mm W20X1/14" M20X1.5
HEXAGON NUT IN GALVANIZED STEEL GAS SIFI ø 10mm
FEMALE BRASS CONNECTOR GERMAN CYLINDER Adapter for Italian regulator to German cylinder Italian male-German female connection Technical Information: Material: Brass Inner diameter Female (German): 20mm Male diameter (Italian): 19.8mm
Biconical fitting with hose clamp for gas pipes diameter 8 mm TECHNICAL INFORMATION Connection diameter: 8 mm
Gas level indicator for camping bottles with Italian connection. Suitable for both Propane and Butane LPG cylinders used in campers, boats and homes. Thanks to this GAS LEVEL it is possible to both check if the level of the cylinder is low and to...
The CBE BMTCO is the new carbon monoxide sensor for campers and boats. The BMTCO detector is able to detect the presence of carbon monoxide (CO) in the air; an acoustic signal warns of the presence of gas in the air before it affects people inside...
KIT 3 ITALIAN REGULATION COUPLERS - EU CYLINDERS Set of 3 pressure regulator cylinder adapter fittings for the following countries Italy, Germany, France, Spain, Portugal, Holland , Switzerland, Norway, Austria, Scotland, Sweden, Denmark, England....
GAS LEAK DETECTOR MCR TRIO-GAS Trivalent gas leak detector, device suitable for detecting the presence of LPG / CARBON MONOXIDE / SOPORIFYING GASES (ether and derivatives). It has 3 LEDs, a test button and provides an acoustic signal during its...
10 NBR gaskets for gas regulators, Italian connection
Fitting for French GAS regulator TECHNICAL INFORMATION Brand: GOK Diameter: 8mm
The CBE BMTG is the new sensor for LPG and soporific gas for campers and boats and replaces the CBE MTG. The CBE BMTG detector is able to detect the presence of LPG (liquefied petroleum gas) and ether gas (narcotic effect) in the air; an acoustic...
Truma Corner Fitting for Combi Stove with John Guest 10 Connection and 10 mm Pipe Camper For truma models 34020-63900
The GOK gas pressure regulator meets all European requirements for the use of gas systems on recreational vehicles. Use only a high-pressure hose to connect to the gas cylinder. When used outdoors, it is best to protect it from direct water...
Customers who bought this product also bought:
The GOK gas pressure regulator meets all European requirements for the use of gas systems on recreational vehicles. Use only a high-pressure hose to connect to the gas cylinder. When used outdoors, it is best to protect it from direct water...
KIT cylinder retaining band for means of transport such as campers, vans, trucks or food trackers TECHNICAL INFORMATION. Material: Plastic Color: Black
PAIR OF RIGHT AND LEFT SIDE STOPS FOR SAITZ CAMPER WINDOWS TECHNICAL INFORMATION Brand: Dometic Item code: BG004712 Color: Beige
Door stop for camper and caravan doors and storage compartments. Fixing with screws not supplied in the package. TECHNICAL INFORMATION White color Distance between pin holes 45 mm Distance between socket holes 30 mm
Viewed products
Power grabber for pre-wired UNIVAL Suitable for 12V or 24V micro blade fuse holders TECHNICAL INFORMATION Power supply: 12Vdc or 24Vdc