COMET EXPANSION VESSEL
Maximum pressure 3 bar at 20°.
For continuous water flow in pressurized systems, installed between the pump and the tap.
It is also essential to be able to use gas or electric heaters and must be installed between the pump and the heater itself.
Ideal for use with pumps without a non-return valve.
Supplied with screws and absorbent strip with double-sided tape.
Attention: the T-fitting must be installed facing downwards.
TECHNICAL INFORMATION
- Brand: Comet 3038.02.00
- Maximum system pressure: 3 bar at 20°C
- Fitting diameter: 10/12 mm
- Diameter: 82 mm
- Height: 280 mm
Data sheet
- 1045
COMET
- Note forniture
- Trigano 910667 10,40
Specific References
- EAN13
- 8032755920571
16 other products in the same category:
Pressure switch for all submersible or inline water pumps. Thanks to this pressure switch, it is possible to switch off the pump automatically when the pressure in the pipes is too high. Useful when using the pump connected to a tap or in...
Straight nylon fitting for flexible pipes. Suitable for drinking water systems. It has a 1/2 inch thread on one side. Therefore convenient for connecting 12V water pumps used on campers and boats. TECHNICAL INFORMATION Shurflo 1/2? - 14NPT(F) X...
Non-return valve for JG submersible pumps, 12 mm cartridge Technical information: Manufacturer: Dimatec Hose connection diameter: 12 mm
Shurflo® pump filter with threaded female and direct male connection for tube connection. To be installed directly into the pump with threaded connection for hose holder. Useful in campers, boats and caravans, to preserve the pump. Thanks to this...
12V 24V Submersible Pump Foot Switch. Useful for activating water pumps in campers or when creating a sink not connected to the water mains. It allows for significant water savings by enabling the pump only for the necessary time. Thanks to this...
TRANSPARENT LEVELS TUBE 10X14 mm Transparent tube sold by the meter with a diameter of 10 x 14 mm Excellent for use with submersible pumps for transferring tanks, as a fitting for irrigation systems or systems in campers and boats. By purchasing...
Expansion vessel from SHURFLO. The expansion vessel saves water and electricity. It can be combined with all pressure switch pumps. Extends the life of the pump and improves its performance. The expansion vessel eliminates the pulsating operation...
REICH FILTER FOR IMMERSION PUMPS Filter that prevents foreign bodies from entering the interior of the submersible pumps. Standard spare part for Reich pumps TECHNICAL INFORMATION Diameter: 30mm Only for Reich submersible pumps
WATER BLOCK SCREW ATTACHMENT FOR CAMPER SEA GROUP WATER BLOCK is a support for supply pipes for SEA Group camper and caravan tanks. Simple to use, it fits in place of the water tank cap. Prevents accidental hose leakage during refueling. You no...
Shurflo® Pump Filter. Installs directly into pump with hose barb threaded connection. Useful in campers, boats and caravans, to preserve the pump. Thanks to this filter, you will no longer have to disassemble the pump for periodic cleaning....
Non-return valve for submersible pumps with vent. Technical information: Manufacturer: Dimatec Hose connection diameter: 10mm
SEAFLO Expansion Vessel. One of the accessories that should never be missing in a camper or boat. The use of an expansion vessel placed after the pressure switch pump brings several benefits: Avoid "water hammer" in the water system Reduces noise...
WATER BLOCK QUICK LOADING WATER TANK REFILL WATER BLOCK is a support for filling pipes of camper and caravan tanks that can solve the problem of loading water onto the camper. Simple to use, it fits in place of the water tank cap. Prevents...
Extend the life of your pump by installing this filter. Prevent your 12V water pump from getting blocked or damaged by dirt. TECHNICAL INFORMATION Filter for Comet pumps, AURO and SUPERLUXUS models Manufacturer: Dimatec
Nylon elbow fitting for flexible hoses. Suitable for drinking water systems on camper pumps. It has a 1/2 inch thread on one side. Therefore convenient for connecting 12V water pumps used on campers and boats. TECHNICAL INFORMATION Shurflo 1/2? -...
Locking nut for Reich submersible pump TECHNICAL INFORMATION Diameter: 16/20mm Contents: 3 dice
Customers who bought this product also bought:
LED REPLACEMENT BULBS G4 CONNECTOR REAR 360° LIGHT Stabilized lights without brightness fluctuations, STABILIGHT technology. Specific spare parts for recreational vehicles and boats. TECHNICAL INFORMATION 15 SMD LEDs Attack: G4 Color temperature:...
Pair of 5m Red + 5m Black solar cable with 4mm section. They are flexible cables suitable for installation in photovoltaic systems. Polymer insulation and halogen-free sheath. The period of use under normal conditions is 25 years. They are...
Submersible water pump suitable for Hymer campers. REICH TWIN model 19 l/min with integrated non-return valve. A special feature of this submersible pump , developed by Reich , is that it has two pumps . Together they provide high flow and...
Pressure switch for all submersible or inline water pumps. Thanks to this pressure switch, it is possible to switch off the pump automatically when the pressure in the pipes is too high. Useful when using the pump connected to a tap or in...
Replacement central seal for Thetford toilet cassettes after June 2000 PACKAGE CONTENTS No. 1 Central gasket for Thetford cassettes after June 2000 TECHNICAL INFORMATION Brand: Haba Spare part: equivalent to Thetford gasket 23721 Compatibility:...
SEAFLO PUMP SERIES 21 12V 3.8 L/min 2.8 Bar The 21 Series pumps are compact and designed for a wide range of applications including: liquid transfer irrigation circulation filtration distribution The 21 series diaphragm pumps are self-priming and...
Kit consisting of a SHURFLO 2095-204-413 TRAIL KING 7 PUMP with fittings and the Shurflo filter. The 12V self-priming pump allows you to connect multiple dispensing points. It can also run dry without damage. Suitable for use on mobile vehicles...
BARWIG PUMP TYP04 12V DC Submersible water pump operating at 12V. The pump is immersed directly in the tank and can be used for various purposes: In a camper or boat as a simple external shower In the boat as a bilge pump To fill the internal tank...
