1 - AC26 and Sanigen Limescale Remover for Pipes Tanks Plumbing Camper Boats
  • 1 - AC26 and Sanigen Limescale Remover for Pipes Tanks Plumbing Camper Boats
  • 2 - AC26 and Sanigen Limescale Remover for Pipes Tanks Plumbing Camper Boats

AC26 and Sanigen Limescale Remover for Pipes Tanks Plumbing Camper Boats

2756
22.50
Tax included delivery in 5-7 days
Quantity
Last items in stock

Security policy (edit with Customer reassurance module)

Delivery policy (edit with Customer reassurance module)

Return policy (edit with Customer reassurance module)

AC26 and Sanigen Limescale Remover for Pipes, Tanks, Camper Plumbing System

The first product created specifically for campers and pleasure boaters. It removes limescale from the tank, pipes, boiler and all fittings without damaging gaskets, o-rings, pipes and tanks.

No more scale in your camper or boat's system!

The package contains two sachets to be diluted each with 25 liters of water to eliminate limescale from the water tank, pipes, and fittings. And a sachet of SANIGEN to further clean the water system by eliminating biofilm, slime and small scale from the walls of the pipes and tank.

Usage:
Dissolve the contents of each of the two sachets in 5 litres of water and pour into the tank. Then add 25 litres of water to the tank if you use 1 sachet or 50 litres of water if you use both sachets

Make sure the water covers all the limescale build-up; fill all the pipes and let it sit for 24/48 hours.

After use, the product must be rinsed well and then sanitized with SANIGEN.

INSTRUCTIONS
 Dissolve the contents of 1 or 2 sachets in 5 litres of water and pour them into the tank, add 25 or 50 litres of water. Check that the water covers the limescale formations. If you need to add water, you will need to add 25 litres and the contents of another sachet. Fill all the pipes, both the hot and cold line, (boiler off) by opening the taps of all the utilities one by one until there is no more air in the pipes. Leave the product to rest in the pipes and in the tank for 24/48 hours: The product does not damage gaskets and O-rings. Drain the water from the tank from the taps of all the utilities, one at a time: the water pressure and the forced flow will eliminate the dissolved limescale from the pipes. Fill with drinking water and rinse all the pipes.

Even generously 2/3 times after using AC26. Also perform the treatment with SANIGEN to eliminate residues and biofilm

Technical specifications

The package contains 2 sachets of the product and a sachet of SANIGEN.

TIPS FOR USE

SANITIZE DRINKING WATER IN CAMPER OR BOAT

Insert 1 ml of BIOCHLOR product into the tank for every 10 litres of water using the special dispenser provided.

supplied in the package. The water is kept bacteriologically clean for 48/96 hours. If

load water of dubious origin, calculate 48 hours for bacteriological coverage, with ?safe? water 96 hours. During the 96 hours, you can top up the water, provided that this

be at most 30 or 40 percent, otherwise it is advisable to add another 1 ml of BIOCHLOR for every 10 liters of water. At the end of using the camper or boat, it is always advisable to completely empty the tanks, when this is possible, leaving all the taps open, to allow the air to dry the pipes.

BIOCHLOR has an expiry date of 24 months from the date of packaging.

New
2756
2 Items

Data sheet


Acquatravel

Specific References

EAN13
2022071310640

16 other products in the same category:

Customers who bought this product also bought:

Viewed products

There are no reviews