Berker series 230V Italian 10A socket. Equipped with safety pockets and rear protection box. Suitable for installation in campers, boats and emergency vehicles. This socket can be combined with the frames from the Berker series, which can be...
German standard 230V Schuko socket with rear protection box. Equipped with safety pockets and rear protection box. Suitable for installation in campers, boats and emergency vehicles. This socket can be combined with the frames of the Berker...
PROTECTION BOX FOR CBE CONTROLS AND SOCKETS MODEL CBE MAS50R. This box should be placed on the back side of sockets and controls. It prevents electrical contact of wires with any metal or abrasive parts that, with movement, could create situations...
12V socket standard type diameter 12 (the small one). This socket can be combined with CBE frames PACKAGE CONTENTS Model CBE MP12 No. 1 12V socket diameter 12 Color Grey
Control Panel CBE PC380 is equipped with a microprocessor-controlled digital system with a 12 COLOR LCD NEGATIVE GRAPHIC control panel with the following functions:
digital clock
test of the engine battery and the service battery B1 e
B2 (in...
Brown single pole switch. This socket can be combined with CBE frames. TECHNICAL INFORMATION CBE MCN Model No. 1 Single-pole switch Color Brown RAL8016
CBE MAP/G LID Replacement cover for camper sockets from the CBE Modular Plates series Gray color model. TECHNICAL INFORMATION Model: CBE MAP Color: Grey Ral7015 CBE Code: 212668
Voltmeter + Ammeter for Control of 1 Camper Battery 12V Touch CBE PT752 Panel with OLED display for monitoring the voltage of a 12V battery and consumption or charge from -260A +260A. With minimum brightness adjustment. Complete with shunt and...
1-module frame for CBE sockets and controls. Model CBE MAC1P/GC ?MODULAR PLATES? series. TECHNICAL INFORMATION No. 1 frame in Light Grey RAL7035 colour Size: 60x60 mm
1-module frame with cover for CBE Berker camper sockets and controls. Model CBE BMAP/GR Grey RAL7021. This frame can be combined with the entire series of Berker sockets and controls, distributed by CBE. TECHNICAL INFORMATION No. 1 frame for a...
PROTECTION BOX FOR CBE CONTROLS AND SOCKETS MODEL CBE MAS50. This box should be placed on the back side of sockets and controls. It prevents electrical contact of wires with any metal or abrasive parts that, with movement, could create situations...
1-module frame for CBE sockets and controls. Model CBE MAC1P/M ?MODULAR PLATES? series. TECHNICAL INFORMATION N° 1 RAL8016 brown color frame Size: 60x 60 mm
Module with 3 RCA sockets + TV socket + Satellite socket. This socket can be combined with CBE frames. TECHNICAL INFORMATION Model CBE MPRCA3TVS No. 1 Module 3 RCA sockets + TV socket + Satellite socket Color Grey RAL7015
CBE PC100 CONTROL PANEL Microprocessor controlled digital system with LED control panel having the following functions: Car battery status test and B1 and B2 services drinking water tank level test grey water tank alarm electronic battery...
Fuse holder module with 4 built-in fuses for campers. Model CBE MPF4. The panel can be combined with the ?MODULAR PLATES? series. PACKAGE CONTENTS No. 1 Fuse holder module with 4 fuses without frame Color Grey
12V cigarette lighter socket with flush mounting and protective cover. Model CBEMP12A-C Does not work with cigarette lighters. PACKAGE CONTENTS No. 1 12V socket diameter 21
1-module frame for CBE sockets and controls. Model CBE MAC1P/M ?MODULAR PLATES? series. TECHNICAL INFORMATION N° 1 RAL8016 brown color frame Size: 60x 60 mm
FIAMMA Vent Neutral White 04329B02- Greater lid hold thanks to the central rod. The elegant low profile design of the outer cover makes it aerodynamic. In high-speed test runs, noise and vibrations during travel were drastically reduced. Thanks to...
BEIGE CABLE GLAND COVER 1 Way Cable Passage Cover, Suitable for Passing Cables of Solar Panels, Cameras, Antennas, etc., from the roof of the camper, caravan or boat. A safe passage for your cables without the risk of water infiltration....
Roof cable gland for campers designed for two cables, but usable up to 6 ways, simply by adding PG13.5 cable glands. Useful for passing cables from solar panels, cameras, antennas, etc., from the roof of a camper, caravan or boat. A safe passage...
Blue CEE plug for external installation in campers and caravans 230V 16A with corrugated cover. Equipped with a swing plug, convenient for connecting the electric cable. TECHNICAL INFORMATION CBE Model: R432 External dimensions: 160 x 111 mm Body...
Shurflo® pump filter with threaded female and direct male connection for tube connection. To be installed directly into the pump with threaded connection for hose holder. Useful in campers, boats and caravans, to preserve the pump. Thanks to this...
White LED ceiling light for outdoor use for campers. It has a 6 LED module for a total power of 3W, comparable to a 30W light from traditional lamps. The body of the lamp is white in color. The front lens spreads the light in all directions,...
R200 MASS NODE MTA 3M8 Camper mass connection node point. Distribution box with lid with three interlocking bolts. 3M8 thread, including three self-locking nuts. 6mm mounting hole. The lid closes. The box has two openings on the cable outlet side,...
BATTERY POLY ADAPTER M6 BOLT Pair of adapters for battery poles with M6 thread. Built in a conical shape. Very useful for converting the poles with bolts of AGM batteries, into normal large poles such as those for car batteries. It is thus...
R5 SPONGE FOR VARIOUS APPLICATIONS R5 is an ideal sponge for using R1 and R2 evenly without residue. APPLICATION AND USE Apply R1 or R3 on R5 sponge various applications and proceed manually with the application. TECHNICAL INFORMATION Code:...
PUSH-LOCK LOCK ROSETTE, FOR DOOR THICKNESS 16 MM, MATT CHROME Article Details: Application: For rotary rod locks or Push-Lock screw locks For panel thickness: 16 mm Assembly : push-fit Execution : plastic Brand : HAFELE Color : NICKEL
