TREND A REICH single-lever mixer tap , modern and elegant, offers a good price /performance ratio .
The overall height is only 40 mm and can therefore also be installed in sinks with glass lids.
The use of high-quality materials for the TREND A camper mixer guarantees a long life .
The single control activates the switch for the pump and controls the water temperature .
It can be used in kitchens and bathrooms .
Suitable for campers and boats or for sinks with independent tank.
Mixer fitted on Hymer, Adria, Hobby campers.
TECHNICAL INFORMATION
- Color: Chrome
- Hole diameter: 26 mm
- Maximum height with tap lowered: 4 cm
- Weight: 150 g
- Maximum Pressure: 3 Bar
- Maximum switch current: 4A
- Rated voltage: 12/24V
Specific References
- EAN13
- 8033002047294
- MPN
- 705292
16 other products in the same category:
Three-spoke filler cap, with rotor and pair of keys. Usable for water and fuel. The cap has a maximum external diameter of 8cm, while the internal diameter is 6.0cm. It has 3 120° teeth that act as a thread. PACKAGE CONTENTS ZADI white cap 2 Keys
FAP SEAL FOR 3" CAP TECHNICAL DATA Brand: FAP Internal diameter: 45 mm External diameter: 85 mm Material: Rubber color: black
Polyethylene food tanks, with recessed inspection cap ø 140 mm. Average wall thickness 4 mm. Our tanks are individually tested. Supplied without fittings. All our tanks can be supplied with food certification. Tanks of different sizes and in black...
REPLACEMENT 90° DRAIN PIPE FOR 25 MM 1"- 1/2" PIPE Replacement part suitable for kitchen sinks in campers and caravans. Suitable for 25mm outlet pipe. Nox grille and 90° exhaust Supplied complete with gasket, without cap. TECHNICAL INFORMATION...
STRAIGHT HOSE CONNECTOR Quick coupling specifically designed for all applications connected to water supply. The great resistance of the plastic material allows it to be used even in the presence of non-food liquids. The extreme ease of assembly...
LEVEL PROBES FOR THE CAMPER GREY WATER TANK Replacement probes for measuring the water level in the recovery tank. Often camper manufacturers use normal screws that oxidize over time and do not allow a correct reading of the water level in the...
THREADLESS PIN ADAPTER Threadless adapter for Fap 3 exhaust valves. For grey water tank systems in campers and caravans. TECHNICAL INFORMATION Brand : FAP Firenze Dimensions 11 cm x 4 sides Material : plastic Color : Black
Gasket for ring nut for water tank hose connector TECHNICAL INFORMATION Diameter: 1" 1/4 Inner diameter: 40 mm Outer diameter: 50 mm
CURVED DRAIN D.20 MM. WITH AUTOMATIC CAP Curved waste plug with hole Ø 20 mm Suitable for sink, washbasin, camper sink. Made of polypropylene, it has good thermal and abrasion resistance. TECHNICAL INFORMATION Brand: Vecamplast Art: 18575.01...
SILVER BALL FOR CLEAR WATER TANK CAMPER SILVER GLOBE is used with drinking water. It maintains water reserves for months without allowing bacterial colonies to proliferate. Therefore useful in campers, boats or in remote areas where water is...
CURVED HOSE CONNECTOR 3/4" x 25mm Threaded Curved Hose Connector Useful for installing a second tank in a camper or as a drain pipe. TECHNICAL INFORMATION Material: Nylon Size: 3/4" x 25mm
WHITE GREY TAP Ø27 MM Camping tap from the Aut. London series by Dimatec guarantees optimal regulation of the water jet. TECHNICAL INFORMATION Product Type: Camping Tap Color : white gray Material: plastic Article : Dimatec Aut. London
15 Litre foldable water tank, suitable for travel, camping, campers and boating. Equipped with a cap with tap and a comfortable handle for transport. Safe product for drinking water, does not contain BPA TECHNICAL INFORMATION Transparent Color...
Camper Van Water Tank Heating Probe 12V 30W Ignition probe, ideal for preventing the grey or clear water of campers or vans from freezing during the winter months, can be easily installed on all tanks via a special hole. It is activated by a...
Kit consisting of a SHURFLO 2095-473-443 TRAIL KING 10 PUMP with fittings and the Shurflo filter. The 24V self-priming pump allows you to connect multiple dispensing points. It can also run dry without damage. Suitable for use on mobile vehicles...
Polyethylene food tanks, with recessed inspection cap Ø 140 mm. Average wall thickness 4 mm. Our tanks are individually tested. Supplied without fittings. All our tanks can be supplied with food certification. Tanks of different sizes are...
Customers who bought this product also bought:
Non-return valve for submersible pumps with vent. Technical information: Manufacturer: Dimatec Hose connection diameter: 10mm
Submersible water pump operating at 12V, model MAAS 15 The pump is immersed directly into the tank and can be used for various purposes: In a camper or boat as a simple external shower In the boat as a bilge pump To fill the internal tank of the...
TRANSPARENT LEVELS TUBE 10X14 mm Transparent tube sold by the meter with a diameter of 10 x 14 mm Excellent for use with submersible pumps for transferring tanks, as a fitting for irrigation systems or systems in campers and boats. By purchasing...
Three-spoke filler cap, with rotor and pair of keys. Usable for water and fuel. The cap has a maximum external diameter of 8cm, while the internal diameter is 6.0cm. It has 3 120° teeth that act as a thread. PACKAGE CONTENTS ZADI white cap 2 Keys
19 l/min submersible water pump operating at 12V d, COMET model LUX PLUS MADE IN GERMANY. Thanks to its high power it is suitable as a bilge pump. It has a maximum head of 8.5 metres. In combination with our photovoltaic kit, it is possible to...
Submersible water pump operating at 12V, model REICH EURO-POWER The pump is immersed directly into the tank and can be used for various purposes: In a camper or boat as a simple external shower In the boat as a bilge pump To fill the internal tank...
COMET ELEGANT 12V DC SUBMERSIBLE PUMP Submersible water pump operating at 12V. The pump is immersed directly in the tank and can be used for various purposes: In a camper or boat as a simple external shower In the boat as a bilge pump To fill the...
Non-return valve for Ø 10mm pipe. Prevents water from flowing back into the pump when turned off. This saves energy by not having to re-pump the water along the entire length of the pipe. Unscrewable for cleaning. TECHNICAL INFORMATION Check valve...
Viewed products
1-module frame for CBE sockets and controls. Model CBE MAC1/M ?MODULAR PLATES? series. TECHNICAL INFORMATION Brand: CBE Mod: MAC1/M Frame 1 module Brown color RAL8016 Dimensions: 86 x 78 mm
3/8" TREM CONNECTOR WITH QUICK CONNECTOR ø 12mm
MINI HEKI OPENING BUTTON Replacement button kit with spring for Dometic Mini-Heki and Style roof lights. Technical features: Brand: Dometic Porthole model: Mini-Heki/Mini-Heki Style Dometic spare part code: BG1329 Color : RAL9001 cream white
