Connector useful for quickly connecting two 5050 LED strips. Thanks to this connector it is possible to reuse pieces of LED strips, without the need to solder wires. Suitable for SMD5050 Single color LED strips.
CHARACTERISTICS
Double connector for bridge between two 5050 LED strips
Connector useful for quickly connecting 5050 LED strips to the power supply with a standard 5mm jack plug. Thanks to this connector it is possible to reuse pieces of LED strips, without the need to solder wires. CHARACTERISTICS Connectors for 5050...
Connector useful for quickly connecting two 3528 LED strips. Thanks to this connector it is possible to reuse pieces of LED strips, without the need to solder wires. Suitable for SMD3528 LED strips CHARACTERISTICS Double connector for bridge...
Screw terminal to 2.1 5mm Jack adapter connector. Useful for quickly connecting, without the aid of soldering irons, power supplies or control units to single-color LED strips. The listing includes only one adapter. There are two adapters in the...
Adapter connector from screw terminal to Jack 2.1 5mm.
Useful for quickly connecting, without the use of soldering irons, power supplies or control units
to single-color LED strips.
The listing includes only one adapter. In the photo there...
Connector useful for quickly connecting 3528 LED strips to the power supply with a standard 5mm jack plug. Thanks to this connector it is possible to reuse pieces of LED strips, without the need to solder wires. CHARACTERISTICS Connectors for 3528...
5 meter LED strip with 300 SMD5050 warm light. It works at 12Vdc and can therefore be installed directly on cars, campers and boats. With the addition of a 12Vdc power supply, it can be installed in homes and commercial premises. With the high...
Spacer for wall mounting of CBE sockets and controls. Model CBE MAD. Suitable for mounting with MAC1P frame ?MODULAR PLATES? series. TECHNICAL INFORMATION No. 1 frame in Grey RAL7015 colour Dimensions: 60 x 60 x 10mm
Bar with 144 SMD4014 LEDs, 1 metre long, complete with aluminium profile and power cable with jack. The cover is entrusted to a white opaline that allows to diffuse the light. This way, glare is avoided and the light is distributed better,...
SWITCH 12V 10A Built-in rocker on/off switch, for 12V voltage and maximum current of 10A. Equipped with a blue LED indicator to verify that the power has been turned on / that there is voltage present. Useful as an accessory for campers, caravans...
SWITCH 12V 20A carpoint 0810681 Built-in rocker on/off switch, for 12V voltage and maximum current of 20A. Equipped with LED indicator to verify that the power has been turned on / voltage is present. Useful as an accessory for campers, caravans...
MPPT SOLAR REGULATOR 10A Bluetooth Waterproof IP67 Get the most out of your solar system with automatic maximum power point adjustment. Battery charge status consideration. LED operation indicators. Watertight product, therefore usable in all...
1-way cable passage kit, for passing cables from solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat. Prepared for second way, adding a M20 PG13.5 cable gland A safe passage for your cables without the risk of water...
Double grey single-pole diverter 12V. CBE frames can be combined with this command. TECHNICAL INFORMATION Model CBE MCD2N No. 1 Double single-pole switch 12V Color Grey RAL7015
KIT 2 PIECES WALL HOOKS FOR TITTA LADDER Spare parts for camper loft ladder and bunk beds. Useful as spare parts or as a new anchor point for the ladder, to store it when not in use. TECHNICAL INFORMATION Brand: Vecamplast Material: plastic
LOW CONSUMPTION ELECTRIC HEATER Electric heater for camper camping low consumption 600W. Thanks to its reduced power, it can also be used in rest areas or campsites, where the electricity supply is limited. In fact, the current consumption is less...
Removable Kitchen Sink Drainer for Camper Camping ACCESSORIES/OPTIONALS DOMETIC HOBS - REMOVABLE DRAINER Beige color. Additional drainer that can be placed on the worktop and that will fit directly into the side of the sink thanks to its two...
HOUSINGS COMPATIBLE WITH ZADI CYLINDERS COMPLETE KIT WITH DRIVE HOUSING AND CLAMPS Useful for replacing the cylinder housing of your locker lockWithout REPLACING THE ENTIRE LOCK. This type of lock is one of the most used on caravans and campers....
PERMANENT CYLINDER STABILIZER PLATES Essential stabilizing plates for jacks. They ensure optimal support on soft ground. Permanent installation for faster and safer parking. Exceptional support surface. TECHNICAL INFORMATION Dimensions (LxW): 165...
END CAP FOR AY TRACK Practical curtain track stops, easy to install and insert into the end of the track, prevents the curtain from falling. Made of durable and high quality plastic. Essential for every track curtain . TECHNICAL INFORMATION Brand:...
REPLACEMENT FOOT FOR TITTA LADDER Spare parts for camper loft ladder and bunk beds. Useful as ladder spare parts. TECHNICAL INFORMATION Brand: Vecamplast Material: plastic Model :Flat
