Battery Power Distributor CBE CSB3 Camper Engine Services
Device for charging the engine battery, both from the solar panel and from the battery charger, via the service battery.
Thanks to the charge distributor, from today you can recharge the starter battery of your Camper from the solar/photovoltaic panel, through the service battery so you will not have unpleasant surprises if the camper has not been started for a long time.
When the voltage of the service battery is greater than 13.6 Volts the distributor will recharge the starter battery.
When the service battery voltage is less than 12.5V the starter battery charging system is deactivated.
The green LED on indicates that the device is ready to charge the starter battery if it requires it.
TECHNICAL INFORMATION: Regulated Current: 0.1 - 4A Max Nominal voltage: 13.6 Volts DC Size (mm): 80 x 50 h 50 code: 205025N
NEW CBE BDS 180 DUAL BATTERY SYSTEM Automatic selector
service batteries
The BATTERY DUO-SYSTEM is an electronic device with integrated microprocessor
capable of intelligently managing two 12V service batteries, both in phase
charging...
AUTOMATIC BATTERY SEPARATOR CSB40/S
The CSB40/S separator is used for parallel charging of car and service batteries.It is
suitable for 2 max 120Ah 12V batteries.
Parallel occurs when the engine is started. in this way the alternator...
The CSB40/SP separator is used for parallel charging of car batteries and
services.It is suitable for 2 batteries max 120Ah 12V. The parallel occurs
when you start the engine. in this way the alternator recharges both
the batteries. At...
The PR-4 parallelizer is a device to be connected between the service battery and the engine battery; it allows the latter to be charged regardless of the source ( photovoltaic modules, battery chargers, generators, etc. ) with a current regulated...
NEW COMING IN APRIL 2025
The battery duo-system is
an electronic device with integrated microprocessor capable of
intelligently manage two 12 V lead acid service batteries,
gel, AGM and lithium, both in the charging phase (with...
SB160 electronic separator spare part specific for PLA vehicles.
TECHNICAL INFORMATION
Power supply voltage: 12 Vdc
Power connection: M8 screws
PACKAGE CONTENTS
N° 1 automatic battery separator CBE SB160
MC-180 REMOTE CONTROL PANEL FOR Battery Duo-System 180
Remote control panel for selecting the operating mode of the BDS-180.MANUAL: the user can choose which battery to use, both in the charging and discharging phase.AUTOMATIC: the service...
Current Distributor for Lithium Batteries CBE CSB3-LT Camper Engine Services Device for charging the engine battery, both from the solar panel and from the battery charger, via the service battery. Thanks to the charge distributor, from today you...
KIT CONSISTING OF THE CBE BDS-180 BATTERY SWITCH AND CBE MC-180 REMOTE CONTROL
Automatic service battery selector
The BATTERY DUO-SYSTEM is an electronic device with integrated microprocessor capable of intelligently managing two 12 V...
The SB100 electronic separator has been specifically designed for battery charging
engine battery (B1) and service battery (B2) via the alternator
engine. An electronic device controlled by the + engine starting key switches on
the...
The CSB96/P separator, unlike the CSB40-SP model, is simply activated
from a keyed 12V signal (for example stereo power signal),
instead of the D+ signal coming from the alternator.
The separator is used for parallel charging of car...
The SB150 electronic separator has been specifically designed for battery charging
engine battery (B1) and service battery (B2) via the alternator
engine. An electronic device controlled by the + engine starting key switches on
the...
NEW CBE BDS 180 DUAL BATTERY SYSTEM Automatic selector
service batteries
The BATTERY DUO-SYSTEM is an electronic device with integrated microprocessor
capable of intelligently managing two 12V service batteries, both in phase
charging...
NEW MODEL CBE CB516-3 BATTERY CHARGER FOR CAMPER AND NAUTICAL
The CBE CB516-3 “CB500-3” series switching battery charger is capable of charging lead-acid batteries (lead-acid, lead-gel, AGM) automatically and with innovative charging phases...
NE143 to NE287 CHARGER ADAPTER CABLE This cable is required for installing the NE287 charger to replace the old NE143 model TECHNICAL DATA: Brand: NordElettronica Model: 000.402.94
Laika camper door stop.White round model for camper external doors and lockers. Fixing with screws not supplied in the package.
TECHNICAL INFORMATION
White colour
Distance between pin holes 25 mm
Distance between socket holes 25 mm
QUADRO DISTRIBUZIONE 12V PER PC-100 / 200
CBE DS300 quadro di distribuzione, alimentazione da 12 V, con fusibili da 3, 5, 10, 20, 25 e 30 A.
Viene fornito completo di fusibili, connessioni e pin necessari per l'uso in roulotte, camper o...
CBE PC100 CONTROL PANEL
Microprocessor-controlled digital system with control panel
LED control with the following functions:
car battery status test and services B1 and B2
drinking water tank level test...
NORDELETTRONICA BATTERY CHARGER MODEL NE 287 21 A
Standard chargers compatible with all types of gel, AGM and lead batteries
and LiFePO4. Charging is carried out by maintaining constant current and voltage.
This means a reduced charging...
2 voti
