
The CBE PRS300 PHOTOVOLTAIC MODULE REGULATOR is designed and built with innovative electronic techniques that allow maximum performance of the photovoltaic modules connected to it.
The regulator is suitable for connecting 12V photovoltaic modules up to a maximum total power of 300W and is designed for connecting the CBE PT642 test panel required for checking the charging of the photovoltaic modules and the battery voltage.
The PRS300 is able to charge lead-gel, lead-acid, AGM and lithium batteries (with integrated electronics), using the appropriate charging line (selectable with the switch located inside the regulator).
A desulfation function is provided which activates automatically when the battery requires this process.
The device has 4 LEDs for signalling:
- Battery charging phase with maximum current until the end-of-charge voltage is reached.
- Constant voltage maintenance phase.
- Incorrect electrical connection alarm.
- Regulator on (in the absence of sunlight the regulator switches off automatically).
High electrical efficiency and very low heat dissipation characterize the PRS300.
TECHNICAL INFORMATION:
- Model: PRS300
- Recommended photovoltaic module power: 300 Watt Max
- Photovoltaic input number: 2
- Rated voltage: 12V
- Auto power off: in the absence of sunlight
- Maximum voltage: 14.3V (Pb-Gel) 14.1V (Pb-Acid) 14.7 (AGM and Lithium)
- Float voltage: 13.8V (Pb-Gel) 13.5V (Pb-Acid) 13.8V (AGM and Lithium)
- Battery desulfation: Yes
- Reverse current blocking device: Electronic
- Dimensions: 115 x 88 x 37 mm
- Weight: 120gr
Can be combined with the CBE PT642 multifunction display
Specific References
- EAN13
- 8033123264723
- MPN
- PRS300
16 other products in the same category:
CBE PRS300 charge regulator kit with CBE PT642 display. THE PRS300 PHOTOVOLTAIC MODULE REGULATOR is designed and built with innovative electronic techniques that allow maximum performance of the photovoltaic modules connected to it. The regulator...
MPPT SOLAR REGULATOR 10A Bluetooth Waterproof IP67 Get the most out of your solar system with automatic maximum power point adjustment. Battery charge status consideration. LED operation indicators. Watertight product, therefore usable in all...
Door
the energy autonomy of your camper to the next level with the
new PRM400 solar charge controller from CBE. This device
advanced is the brain of your photovoltaic system, designed to
make the most of every single ray of sunshine,...
MPPT charge controller with display EPSOLAR TRACER 3215AN 30A uses the latest technology for these devices. This is the MPPT function that ensures 30% higher efficiency compared to traditional charge regulators. Thanks to this function, the...
SOLAR REGULATOR MPPT 10A Waterproof IP67 Every solar installation needs a solar charge controller. As the name suggests, this device regulates the solar charge created by your photovoltaic panel to optimize performance and protect your battery....
RS485-USB ADAPTER FOR EPEVER EPSOLAR CHARGE REGULATOR OR INVERTER With the appropriate monitoring software for the controller, you can, for example, track and graphically record solar power, battery voltage and load power in real time and change...
CBE PT742 Touch Display for PRS300 and PRM350 Solar Camper Charge Controller DIGITAL TOUCH TEST PANEL with OLED display for checking the battery voltage and the current supplied by the photovoltaic module, complete with 1.5m cable, spacer for...
EXTERNAL TEMPERATURE SENSOR FOR EPEVER EPSOLAR CHARGE CONTROLLER The temperature sensor is connected to the charge controller and applied to the battery. This allows the sensor to transmit the exact battery temperature to the charge controller....
EZA SOLAR MPPT 15A SOLAR REGULATOR Get the most out of your solar system with automatic maximum power point adjustment. Battery charge status consideration. LED operation indicators. Watertight product, therefore usable in all difficult...
NV-1024 YJSS10 CHARGE REGULATOR Campers and campers are increasingly demanding and want all the comforts of home even on vacation. The number of light points and electrical and electronic systems on board has increased exponentially. Televisions,...
The Phocos BCM is an innovative charger for AA batteries. It charges at constant current and limits the voltage to avoid overcharging the batteries. It is possible to charge batteries of different capacities and from different manufacturers, as...
EPSOLAR TRACER 2210AN 20A MPPT charge controller uses the latest technology for these devices. This is the MPPT function that ensures 30% higher efficiency compared to traditional charge regulators. Equipped with built-in multi-function LCD...
TEMPERATURE SENSOR FOR EPEVER EPSOLAR CHARGE CONTROLLER The temperature sensor is connected to the charge controller and applied to the battery. This allows the sensor to transmit the exact temperature of the battery to the charge controller. This...
SOLAR REGULATOR LCD PWM 20A PWM Smart Pulse solar controllers enable the safe operation of small power solar panels (up to 130W). They effectively protect batteries from overvoltage, deep discharge, short circuits, voltage spikes and sulfation....
MICRO USB-USB FEMALE ADAPTER FOR EPEVER EPSOLAR CHARGE REGULATOR The Micro USB adapter allows you to connect EPEVER (EPSolar) charge controllers to your Smartphone for easy monitoring and programming. Technical information: Model: CC-OTG-12
The PRM350 solar regulator is able to charge lead batteries (liquid, gel and AGM) and 12V lithium batteries automatically by controlling and limiting the energy supplied by the connected photovoltaic modules. It has an MPPT (Maximum Power Point...