LITTELFUSE MEGAVAL series fuse. MegaVAL® Fuses comply with ISO 8820-5, the recommended standard for the protection of wires carrying high currents. MegaVAL® 100A fuses are made of zinc alloy. The dedicated fuse holder (CBE R459) is available in...
STANDARD TREM FUSE BOX WITH LED LIGHTS Accepts standard blade fuses. Complete with blown fuse alarm LED. TECHNICAL INFO Brand: Trem Fuse locations: 6 Alarm LED: 6 Max capacity A 100 Dimensions: 63x85x36x63 mm
R200 MASS NODE MTA 3M8 Camper mass connection node point. Distribution box with lid with three interlocking bolts. 3M8 thread, including three self-locking nuts. 6mm mounting hole. The lid closes. The box has two openings on the cable outlet side,...
12V 24V cigarette lighter type plug with switch and adapter to be used on 12mm diameter or 21mm diameter sockets. The plug integrates an 8A fuse and is therefore convenient and quick to connect a 12V appliance to our car or camper. TECHNICAL...
12V TIN SOLDERING IRON 30W 12V Portable Soldering Iron. Useful accessory to keep in your car, camper or van. Equipped with cigarette lighter plug for quick and easy installation. The power of 30W makes it suitable for soldering both wires and...
STANDARD TREM FUSE BOX WITH LED LIGHTS Accepts standard blade fuses. Complete with blown fuse alarm LED. TECHNICAL INFO Brand: Trem Fuse locations: 4 Alarm LED: 4 Max capacity A. 100 Dimensions: 47x85x36x63 mm
12V socket with 21 mm diameter (large model). The socket is supplied complete with a 1.8m long cable PACKAGE CONTENTS No. 1 12V socket diameter 21mm with 1.8m cable Model CBE R510/2
LITTELFUSE MEGAVAL series fuse. MegaVAL® Fuses comply with ISO 8820-5, the recommended standard for the protection of wires carrying high currents. MegaVAL® 150A fuses are made of zinc alloy. The dedicated fuse holder (CBE R459) is available in...
LITTELFUSE MEGAVAL series fuse. MegaVAL® Fuses comply with ISO 8820-5, the recommended standard for the protection of wires carrying high currents. MegaVAL® 200A fuses are made of zinc alloy. The dedicated fuse holder (CBE R459) is available in...
12V socket with 12 mm diameter ( small model ). The assembly is on a panel and the fixing nut is supplied as shown in the photo. PACKAGE CONTENTS No. 1 12V socket diameter 12mm Model CBE R511
Roof cable gland for campers designed for two cables, but usable up to 6 ways, simply by adding PG13.5 cable glands. Useful for passing cables from solar panels, cameras, antennas, etc., from the roof of a camper, caravan or boat. A safe passage...
LITTELFUSE MEGAVAL series fuse. MegaVAL® Fuses comply with ISO 8820-5, the recommended standard for the protection of wires carrying high currents. MegaVAL® 200A fuses are made of zinc alloy. The dedicated fuse holder (CBE R459) is available in...
LITTELFUSE MEGAVAL series fuse. MegaVAL® Fuses comply with ISO 8820-5, the recommended standard for the protection of wires carrying high currents. MegaVAL® 150A fuses are made of zinc alloy. The dedicated fuse holder (CBE R459) is available in...
TWILIGHT SENSOR 12V ac/dc 10A Thanks to this twilight switch, working at 12V ac/dc, it is possible to enable in photovoltaic systems or in any case in low voltage systems, LED lights, security cameras, control systems, fence energizers etc... It...
Fixing support for photovoltaic modules to be glued to the camper roof. Specially designed for the camper - caravan sector. Easy to install, no drilling required. Application in a few minutes using polyurethane glue. Applicable even on surfaces...
Useful flying fuse holder in blister pack for 50A blade fuses. Complete with cable lug. An object that should never be missing for carrying out safe installations in cars, campers, boats and for the installation of photovoltaic kits. PACKAGE...
Useful fuse holder with 10A fuse for car camper and boat. An object that should never be missing to carry out safe installations, including the installation of photovoltaic kits. PACKAGE CONTENTS No. 1 Flying fuse holder No. 1 10A fuse
